PDA

View Full Version : NO START IAW 16F.T8



mostafa badawi
6th January, 2012, 07:01 PM
Knowing all the electronic parts Software 27C512 good good what's the problem 68HC11 Is it possible I want a solution

umoussa
6th January, 2012, 07:47 PM
This is Dogan?

zoro1
6th January, 2012, 07:54 PM
Immo is in 68hc11f,read it with fiat immo emulator/software and hardware /,software can do immo of.

umoussa
6th January, 2012, 07:56 PM
If it's Dogan then it's not immobilized

mostafa badawi
6th January, 2012, 08:09 PM
YES Dogan then it's not immobilized

mostafa badawi
6th January, 2012, 08:40 PM
If it's Dogan then it's not immobilized
PELEES I want a solution

zoro1
6th January, 2012, 08:51 PM
give more info!Do you read the car,or only Ecu is in your hands,what is the car problem,do you compare eeprom data with original software form other car or place?Do you check electronic parts and PCB?

umoussa
6th January, 2012, 08:54 PM
Can you reach the ecu by diag tool?

mostafa badawi
6th January, 2012, 10:10 PM
THIS EEPROM 27C256

mostafa badawi
6th January, 2012, 10:18 PM
Is there any Software I.C by another in the same ECU

boza
7th January, 2012, 01:50 AM
Yes, immo is in motorola 68hc11f1. If problem on car is immo you need to read motorola procesor.

zoro1
7th January, 2012, 10:11 AM
Badawi ,27c is UV or OTP eeprom,data in it can be damage by low voltage or else,you can read it -so mast be fine,give some errors from the car ,if you dont have proper software i will post one for fiat/no fiatscan/,works with simple k-line adaptor or visa uniscan,you can read errors in the ECU ,even on the table.If you are shure that IMMO is of by factory you mast read DTC,to see what is the problem.Car can start form crakc sensor,or some short on relay-s...Can tell like this on blind.

mostafa badawi
7th January, 2012, 04:29 PM
Badawi ,27c is UV or OTP eeprom,data in it can be damage by low voltage or else,you can read it -so mast be fine,give some errors from the car ,if you dont have proper software i will post one for fiat/no fiatscan/,works with simple k-line adaptor or visa uniscan,you can read errors in the ECU ,even on the table.If you are shure that IMMO is of by factory you mast read DTC,to see what is the problem.Car can start form crakc sensor,or some short on relay-s...Can tell like this on blind.
INEED PASSWORD

zoro1
7th January, 2012, 05:26 PM
I send it to you on PM.

zoro1
9th January, 2012, 02:12 PM
badawi,here is softwarecfor fiat and shematoc of adapter-k-l or uniscan.test ECU for errors,i will search my database for file for 27c to compare it with yours.

saadiadel
9th January, 2012, 03:13 PM
a3tik el 7all en cha allah skype:tunisien047

araby80
27th December, 2013, 06:42 PM
plz password

ankara06
28th December, 2013, 08:10 AM
:D dogan :D X 10000 turkish bad car.

common problem in HC11F1 bad dump + injector driver
mail me if you need good dump for HC11F1,,,no need diag,no need others...

Multipla
29th December, 2013, 12:42 AM
If you have upa or CarProg solve the same when read 68H resove in FF first 20? string ad solve it.

saitinam
19th April, 2014, 06:57 PM
:D dogan :D X 10000 turkish bad car.

common problem in HC11F1 bad dump + injector driver
mail me if you need good dump for HC11F1,,,no need diag,no need others...
can you send me solution obaut it
ı have got same problem