problem with detroit diesel ddec IV.

[khadang]

i have 2 ecm.
1: ddec IV 06R0949590 sofware level is 29.5 s60
2: ddec IV 5262000373 sofware level is 31.7 12v4000
i want use ddec 2 for 1.
i converter file calibarion 29.5 to 31.7, download it with ddct and run in s60.
but the engine run not good and show error : injector respone time.
i think that cause sofware level.
im try erase blank all data this ecu to download file calibration 29.5 to ecm .but ddct can not download it.
i try whith ddrs ( i only have file download for s60). ddrs show error : wrong ecm hardware, get type "V" or "H".
i have 4 problem:
1 : how to get ecm return original . i have backup file calibration on ddct.
2 : the error injector respone time cause what? ecm sofware level or i should " injector calibraion" correct injector type for thic ecm.
3 : where i can get file calibration for esn : 5262000373.i can buy it. give me information about file V or H.
4 : have a difference of 2 ECM hardware or not?
and if i want change ecm, what should I do?

thank so much.

[educar21]

good day friend, the problem you have is your ecm is the identification that is of type "V" or "H":party:

[khadang]

hi dk friend.
im need file calibration for
ddec IV 06R0949590
ddec IV 5262000373
any peope have, can shared or sale for me.
thank much advance.

[khadang]

this is video of ddec IV 5262000373.
dk friend can help how to program it.
thank much.

[ddmech]

I dont know for sure but I think the v12 ecm part# is different to the s60 friend.

[khadang]

I dont know for sure but I think the v12 ecm part# is different to the s60 friend.

yes ddmech, v12 ecm part # different s60.
i dont know how to reprogram for this v12 blank ecm.

[khadang]

hi all!
please share me file reprogram for ddec IV S4000!
thank advance.

[dieselequipos]

hi all!
please share me file reprogram for ddec IV S4000!
thank advance.



friend send a part number of ecm and send engine serial number ...

[khadang]

friend send a part number of ecm and send engine serial number ...

DDEC IV - S4000
esn: 5262000373
DDEC part : P23519309
DDEC serial : RF8002LR.
i'm verry need it.
thank much friend.

[carlosramospoma]

I dont know for sure but I think the v12 ecm part# is different to the s60 friend.

hello friend please can you help with calibration for the DRS for Detroit Series 60 decIV 12 liters engine numbe O6R1036641 r one 500HP Torque1650 lbs

[hercamp]

DDEC IV - S4000
esn: 5262000373
DDEC part : P23519309
DDEC serial : RF8002LR.
i'm verry need it.
thank much friend.



time ago I modify a cal file for you, never knoe if works!!

well... in the video you just choose any calibration file u get from here??? i cant see the serials,

ddrs say u need H, is normally if you think that u try to program V engine ; 8v ,12v or any marine engine with controler as genset or truck engine , all seems to be same ,but internal hardware inst ,

I just like to know , why ecm is blsnk??? u try download cal file with dct or flash with ddrs???

i can give a file for H type ,that will solve your problem ,im 70% sure of that...but th 30% im not sure at all because dont know what is the reason of the boote mode.

[khadang]

time ago I modify a cal file for you, never knoe if works!!

well... in the video you just choose any calibration file u get from here??? i cant see the serials,

ddrs say u need H, is normally if you think that u try to program V engine ; 8v ,12v or any marine engine with controler as genset or truck engine , all seems to be same ,but internal hardware inst ,

I just like to know , why ecm is blsnk??? u try download cal file with dct or flash with ddrs???

i can give a file for H type ,that will solve your problem ,im 70% sure of that...but th 30% im not sure at all because dont know what is the reason of the boote mode.

thank you verry much.
-My client has accepted use it so I do not have a chance to try your file you no good, sorry about that
-you can select any file calibation supply ECM version, if it is different you can convert the ECM version of the file you need to use
-Then I realized that three types of ECM, 12v onhighway, 24 and S4000 only.each allow only reprogram its file type.
-ecm blank because i try blank all data of ecm on ddct.
-I did raise ECM, I bought from my friends file for S4000 only, and it ok with DDRs, my friend I take it from the DDC server.same serial no.
sorry my english bad.

[hercamp]

I WILL TRY TO CORRECT , FROM YOUR POST, I THINK U ARE SOME COFUSE. BETWEN DRS AND DCT

thank you verry much.
-My client has accepted use it so I do not have a chance to try your file you no good, sorry about that
-you can select any file calibation supply ECM version, if it is different you can convert the ECM version of the file you need to use ???????

YES YOU CAN SELECT ANY CALIBRATION, BUT ., THERE U SHOW DRS, NOT DCT, AND U CAN CONVERT CALIBRATION WITH DCT AND ONLY CAN DOWNLOAD TO ECM IF MATCH WITH THE ECM VERCION, U CAN?T UPGRADE WITHOUT FLASH WITH DRS...


-Then I realized that three types of ECM, 12v onhighway, 24 and S4000 only.each allow only reprogram its file type.
-ecm blank because i try blank all data of ecm on ddct.
-I did raise ECM, I bought from my friends file for S4000 only, and it ok with DDRs, my friend I take it from the DDC server.same serial no.
sorry my english bad.

OK , BUT IN THE VIDEO , SAY U NEED H TYPE, WICH VERCION U TRY REL 32 OR 21 FOR 08HXXXX???? WHAT IS THE SERIAL OF THE ECM?? AND WHAT IS THE SERIAL U BOUTH FROM YOUR FRIEND??

NOW ECM IS BLANCK OR BOOT MODE 3 OR 4??

[crazy60]

If you have a blank ecm on ddct ou first need the correct prg in the ecm, then download the cal