PDA

View Full Version : Digit Transponders 1w



Andreas
8th January, 2009, 11:34 PM
Hi there, first post on this forum.

I have just set up my motorized system together with using diablo 2.3 for the footie. Searched for Canal sport channels and openned them no problem, but i cannot get good enough quality readings for the digi package channels (nova sport czeh, prima sport, etc), despite the signal strength being pretty decent 90%-95%.

The system seems to be set up correctly on the arch as i receive other satellites.

Any ideass?

Curious123
8th January, 2009, 11:59 PM
Try this on your box;

Menu > Setup > tansponders and satellite > transponder Edit > Scroll down till you find 1.0W Thor > Ok > change orbital position from 10 to 8 > Save.

.: JaCkPoT :.
9th January, 2009, 12:03 AM
Canal is on 0.8west and digitv is 1west.. Why not change the settings to 0.9 instead to get the best of both worlds

Andreas
10th January, 2009, 06:11 PM
The 0.8w is not listed on my technomate box, do i need them set as 2 separare satellites? I presume my 90cm dish in Cheshire is ok?

Could this be a lnb frequency issue, as i can pick up all transponders up to 11.750 but none above? The lnb is set on universial freq 9.750 / 10.750.

Thanks in advance...

.: JaCkPoT :.
11th January, 2009, 12:56 AM
No..the two sats are merged into to one and classed as one..
90 cm is fine

Andreas
11th January, 2009, 01:21 AM
Cheers for the info. I will try and fine tune 1w tomorrow.

I take it a universal lnb should pick up all transponders needed?

.: JaCkPoT :.
11th January, 2009, 02:05 AM
Yeah..will definately