traffic vivaro with mpps

[ninja123]

Hi to all chip tuning guys,
im after a bit of info here, i got mpps clone and it lists renault traffic 2.0 edc16, but keeps giving error when trying to read.

I am trying to read so I can restore full performance after being restricted to 70 mph.

I have tried on a restricted one and one that has not been tampered with, but same results on both-ERROR.

Is there something I need to do or do I need to buy some more software/leads ect??

I know these were restricted via obd socket, ecu never removed, so looking for same to put them back to original.

Any info would be fantastic,

regards ninja

[macxlulu]

2.0 cdti is edc16 in safe read and write in bdm

[z786]

i have V12 if u wanna try it Ninja ;)

[ninja123]

Yes mate, Im trying to remove speed limiters from the vans as they are being sold off now.

I was in bed last night mate, been on earlies, Ill call you later.

ninja

[Novik_UA]

I try 2.0 and 2.5 traffic from 2007-2008 years, and MPPS V5 didn't read it, BDM100 do the job perfect.
And with Renault Can Clip can do it without open ECU.

[obnchip]

try to push ecu id
then turn ignition off
then turn ignition on
and try to read

edc16 cp33 works like that with mpps

[ninja123]

what do you mean by 'push'??

ninja

[obnchip]

what do you mean by 'push'??

ninja

make ecu id...

[Novik_UA]

try to push ecu id
then turn ignition off
then turn ignition on
and try to read

edc16 cp33 works like that with mpps
Try it, didn't work on 3 vanes. MPPS read nozzle codes, and after that security access error.
But nozzle codes was read good, try with Can Clip, and was the same.

[ninja123]

I had same results mate:(

ninja

[powertdi]

Fgtech also read nozzles code like own file and save it, then you read and right without problem. At start it has slow reading (security access) and than no problem. Write is the same. Everything work fine.

[ninja123]

what is fgtech, and where to buy>

ninja

[Youneselm]

how to remove the speed limiter with can-clip?

[z786]

what is fgtech, and where to buy>

ninja

it costs roughly 4 Grand mate :)

the clone goes around 1400 EUR

still want one?

[ninja123]

HA HA!!! no!!

Looks like ecu out and bdm if clip cant do, ill still like to give yours a try when I can get a spare 5 mins mate, I might have 1,400 of these to do soon!!!

ninja

[z786]

jus gimme a ring wen ur ready mate :)