1996 audi a4 1.8 immo

[foster150]

hi i need some help with 1996 audi a4 1.8 the immo box is faulty so can not generate a working transponder does anyone have a solution to remove the immo at the ecu and if so which eprom on the bosch 0261023938939 ecu will i need to read dump from

[xpto]

i think its 24c02

[pipina]

Load the dump and start the car ... the immo mil will stay on.

regards, Pipina

[foster150]

Load the dump and start the car ... the immo mil will stay on.

regards, Pipina
thank you for this do i need to disconnect the immo or anything after writing new dump to ecu thanks again

[pipina]

Just write the dump, you don't need to do anything else.

[ecufix]

Do the dump in the 29f010 , by doing a search you will find a recent non passworded solution , regards

[Anmed]

There is another solution: to leave everything as is, powered IMMO pin15 of pin30 through diode and enter your login. The car will run until the battery disconnected. If the battery is disconnected - need to re-enter your login.

[bursuc]

If that fil is not working try this one , it's work 100% , you need to take out immo box aswell :)
http://www.digital-kaos.co.uk/forums/f178/audi-a4-1-6-1-8-immo-off-file-super-ok-237780/