PDA

View Full Version : injector pump repairs


ray978
12th January, 2012, 08:42 AM
Hello friends. I have a problem of my audi a3 year 2003. I have my injector short circuit is the car will not start. I know there is a way to repair. Can you help me? thanks
ray978
12th January, 2012, 12:48 PM
nobody knows how to fix this short-circuit injector?


do not answer all set
one at a time .. thanks

:)
Ashraf6119
12th January, 2012, 06:18 PM
Is this 1.9lt Engine or, its 2.0lt.............?
oldford
12th January, 2012, 06:54 PM
In 4 hours you probably could have towed the car to the dealer and have it repaired.
ray978
12th January, 2012, 08:54 PM
Is this 1.9lt Engine or, its 2.0lt.............?




2.0 170 cv is my engine


coil is shorted .. I know it can be repaired but noo know how to fix .. thanks
Youneselm
12th January, 2012, 08:56 PM
never mate, when you open the coil it will break
ray978
12th January, 2012, 10:11 PM
I have seen the work already done ... I say that there is someone who knows how to do ..
I saw you make two holes in the back is I do not know what to change within
demo01
12th January, 2012, 10:14 PM
if you have 2.0 and siemens system, you have piezo injectors, not coil
ray978
12th January, 2012, 11:01 PM
this is my injector 03G130073M
smokey08
12th January, 2012, 11:13 PM
this is my injector 03G130073M

That is a siemens injector. The price of these injectors has now dropped considerably (I buy them genuine) so just replace them.
ray978
13th January, 2012, 12:01 AM
I know that the price has dropped .. a garage near my house can be repaired with a few euros. The problem is that he does not want to teach me the way ...
Ashraf6119
13th January, 2012, 09:19 AM
That is a siemens injector. The price of these injectors has now dropped considerably (I buy them genuine) so just replace them.


Yes I do agree with Smokey.........There are two types of injectors for this model one is low price and the other is bit high........So, check with your local dealer before doing any thing..........

I personally have tried once to get it repaired and yes it did work fine......... but, at that time the prices were very high so, there was no any option at that time........:giveup:
And again you will only need one injector as they don't go wrong all at once...........most probably it will be #1 or #3 as they are the common I have done so far.........
ray978
13th January, 2012, 01:42 PM
ok .. but how to repair?