PDA

View Full Version : DFP off FORD Focus 1.6



kty
12th January, 2012, 08:39 PM
Please help me to disable particulate filter on this car:
Ford Focus 1.6 TDCi 2006
Tell me what memory-flash should I read??
It is possible to read X-prog-m or Wellon VP-990??

Thank you !!!!!!!

P2XA
12th January, 2012, 09:23 PM
possible to read with galletto 1260 via OBD & Xprog-M via BDM pads.

robert54
12th January, 2012, 09:36 PM
read ecu first with BDM or mpps

kty
12th January, 2012, 09:52 PM
Thank you all :)

Galletto 1260's price is ok, and it can be done a lot of things with it, but I didn't found certain details that I can read this ecu...
What do you recommend ??

P2XA
12th January, 2012, 11:01 PM
galletto or BDM

bluebird81
12th January, 2012, 11:37 PM
I had my DPF removed from ECU by www.evolutionchips.com (http://www.evolutionchips.com) which cost me ?285 with life-time warranty. The physical removal was done by a local garage with welding facility. Just cut the DPF body into two half, and then smash the ceramic DPF with hammer and chisel and then weld the exhaust pipe together.

VRPerformance
13th January, 2012, 12:21 AM
you did well,better to pay for professional than open the ecu and ask for ''witch chip i need to read for dpf off''

z786
13th January, 2012, 01:25 AM
i have done dpf off on one of these, i have file here but i PAID for my file, i CHARGED for the job

spend money, make money

simples

kty
19th January, 2012, 07:27 PM
Hello friends,

Please help me to disable particulate filter on this car:
Ford Focus 1.6 TDCi 2006

I've manage to read the ECU with GALLETTO....

Please help !!!!!!:adore:

macxlulu
19th January, 2012, 07:42 PM
for free file use ecusafe,profesional job must pay, aaa suspect the injectors decode...if write to obd

kty
19th January, 2012, 07:59 PM
for free file use ecusafe,profesional job must pay, aaa suspect the injectors decode...if write to obd

I managed to ecusafe...
The bin that I attached is read correctly??
You do not recommend that the rewriting of the OBD (galletto) for the injection errors??car will not start or will go wrong?

Thank you for your patience.

P2XA
19th January, 2012, 08:20 PM
problem is not in Galletto

macxlulu
19th January, 2012, 08:23 PM
ecusafe -1.6 ford ,mazda,Citroen etc... -big problem ,back fault dtc and regenration fap

these engines have a written code of injectors in memory ecu,if the write will be made by soft dpf off i OBD 90% injectors lost code ,later you will need to use the Ford IDS or codes to enter to ecu ....


I personally once again managed to do mpps by obd and it was not lost code injectors.. im wating 300 sec after reflash

summarizing:
1)ecusafe - will be big problems, from dpf regeneration mode will cause more oil in the engine and the car will smoke

2)galetto for Ford edc16...ehh
transmission if you do not fall..., then lose 90% of injectors codes

Ford tdci 1.6 does not ecusafe and manually and I use it to read and write BDM (safe)

kty
19th January, 2012, 08:30 PM
problem is not in Galletto

But it is a problem?
The bin that I attached is read correctly??
After modification with bin DFP can write Galletto by OBD?
Thank you.

P2XA
19th January, 2012, 08:55 PM
yes you can write correct flash back

kty
19th January, 2012, 09:35 PM
I did file DFP with the ecusafe How can I check whether the codes of the injectors are lost? (outside of check on the car)

sepistar
19th January, 2012, 09:42 PM
I did file DFP with the ecusafe How can I check whether the codes of the injectors are lost? (outside of check on the car)
You can not,but after you write back on ecu and something goes bad,must recode ecu and the injectors.

Best regards

ecutuners
19th January, 2012, 10:27 PM
I did file DFP with the ecusafe How can I check whether the codes of the injectors are lost? (outside of check on the car)

Dont waste your time, ecusafe dont work and injector codes will be lost

kty
20th January, 2012, 08:37 AM
Unfortunately, I repeat:adore:
Friends please help me with DFP
for this car Ford Focus 1.6 TDCi 2006

Helppppp

mecano_diag
20th January, 2012, 10:17 AM
Dfp removed
Enjoy.

kty
20th January, 2012, 11:32 AM
Dfp removed
Enjoy.

Thank you very much mecano_diag !
I'm looking forwardto try ...

ray978
20th January, 2012, 11:53 AM
also try this. tell us if it goes well

kty
20th January, 2012, 12:14 PM
also try this. tell us if it goes well

OK :)

Thank you all !!!!!!!!!!

chiptunerkft
20th January, 2012, 09:18 PM
Both files are waste of time :)

ray978
20th January, 2012, 10:21 PM
Both files are waste of time :)

And how will you solve?

ecutuners
20th January, 2012, 10:23 PM
And how will you solve?

With a single byte ! ;)

super jumbe
20th January, 2012, 10:32 PM
~~~~ all that just buy your self ford vcm obd tool and remove DFP TESTED ON MOST FORDS AND MAZDA.


:party: :party: :party:

z786
21st January, 2012, 12:53 AM
how do u do that SJ, have u tried it?

super jumbe
21st January, 2012, 01:26 AM
Z786 If you read instructions its quite easy mate.

I have done ford cars, the last one I did was Mazda 2007 it took 40 minites for vcm to clear the DFP.

:party:

btr
21st January, 2012, 04:18 AM
Dont waste your time, ecusafe dont work and injector codes will be lost
Injectors codes are saved in eeprom memory,with BDM is easy way restore it

ray978
21st January, 2012, 02:08 PM
With a single byte ! ;)

can be more clear?

yas200979
21st January, 2012, 03:30 PM
Change 01 to 00. DPF OFF.

ray978
23rd January, 2012, 11:18 AM
Change 01 to 00. DPF OFF.

we are not all as good as you .. You can send a guide for this?
thanks