please need immo off megane dti 1.9

[klonone]

hello i need help immo off in this file
DOWN post
thanks

[klonone]

please i can explain also whether to cut or desolder any pin 24c02. thanks

[alldecode]

I dump make with Immo Killer 1.1

pin 7 conect to +5v for WP, but you must use eprom with function WP

and pin 59 cut

and work, i tested 100%

if only remove memory 24c02 car work up to 2500 o/min

[klonone]

thanks alldecode
I can attach the Pin 7 with 8????

[mekaoui]

thanks alldecode
I can attach the Pin 7 with 8

yes and change 24c02 with 24c16

[klonone]

thanks ,is very important change 24c16????

[mekaoui]

thanks ,is very important change 24c16????
yes and cut pin59 ecu

[klonone]

hello
I have recorded with 24C02 eeprom file generated by killerimmo 1.1
the motor starts.
light stays flashing ~~~~~~~(heater
to accelerate the light turns off
and ligth on at 800rpm.
the immobilizer light flashing all time

when l stop motor will not start

read the EEPROM and this changed
this files

i desoldering pin pcb number 7 and have joined with pin 8
and cut pin 59 ecu

please help

[klonone]

I test ,not have found errors
pin 59 cut
5v + eeprom pin 7

I do not understand that every time I start the engine modifies the eeprom

[klonone]

please helpp