Renault Kangoo 1.4 Sirius 32 immo off

[mellon]

Hi.
I need immo off in ecu Kangoo 1.4 without AC sirius 32. I tried several files from the forum but there are problems with the low rpm of the engine. FF fill from 4000 to 7FF8 Memory-29F200 but also a problem with engine.
S110030306 D
8200024376
7700110471

Adam

[alfabit]

Hi.
I need immo off in ecu Kangoo 1.4 without AC sirius 32. I tried several files from the forum but there are problems with the low rpm of the engine. FF fill from 4000 to 7FF8 Memory-29F200 but also a problem with engine.

Adam

0x4000-0x8000 > FF is VIRGIN ! Not immo off ! With a virgin ecu you MUST have good keys and ucbic ( uch ) OR use emu.
EMU is the surest way to do it. And no doubt will work ( if engine ok, no other mechanic-electric failures )

[jacostanzo]

Try this dump, usually works with me, you must cut pin 58, immo line from ecu

[Anmed]

alfabit (http://www.digital-kaos.co.uk/forums/members/118422-alfabit/) absolutely right!
Often enough to make a virgin ECU. Necessary to connect the emulator IMMO. I can give the emulator circuit for Renault.
IMMO OFF for Sirius32 I have not seen.

[mellon]

I did have this ecu many times but with the 1.2 and 1.6 engine in megane and thalia. So not need to use emu.
mihai_vyt - He knows how to do it :)

[Anmed]

I heard about that, but never met.

[lupu_sandu]

All Sirius32 (non CAN) can work without emulator or key.
Also same rule applies to EMS3132 ECU.

[ziko]

no emulator need, cut line 58

[luiggii79]

here is off, no emulator need, cut line 58
pass please

[ziko]

pass send on PM to "mellon" and to you (but post refused, you must delete some post in PM, no empty space)...

[mellon]

I do not know what's going on. Engine runs unevenly at idle. It raises and lowers. Unless programmed original and unlocked it using code. See how it will behave

[ziko]

maybe other problem, my off file must be ok, many cars I made

[alfabit]

I do not know what's going on. Engine runs unevenly at idle. It raises and lowers. Unless programmed original and unlocked it using code. See how it will behave

Your engine has other problems, must do a diag with cilp or ddt.
As soon as your engine started, you succeeded to make immo off. There are some of failures ( mechanical or electric ) leading to a bad working idle run.

But with immo on you`ve never started your engine, this is for sure !

[alfabit]

Completion of the last post : you must be sure of the sw you write in your flash, because working problems could occur if you change the sw from an engine type to an other, this is not the same sw from a Clio/Thalia 1.4 8v and Kangoo 1.4 8v, even they have the same hardware Siemens Sirius 32. That`s why i say one more time, use your own sw virgin and use emu, DO NOT CHANGE SW IN THE FLASH !

[bangreno]

Completion of the last post : you must be sure of the sw you write in your flash, because working problems could occur if you change the sw from an engine type to an other, this is not the same sw from a Clio/Thalia 1.4 8v and Kangoo 1.4 8v, even they have the same hardware Siemens Sirius 32. That`s why i say one more time, use your own sw virgin and use emu, DO NOT CHANGE SW IN THE FLASH !

Rights ,
Putting another flash will start the car , but some little problems on idle and low RPM , but not so catastrophic.

[alfabit]

Rights ,
Putting another flash will start the car , but some little problems on idle and low RPM , but not so catastrophic.

This is what i explained to mellon. He is complaining exactly about this :



I do not know what's going on. Engine runs unevenly at idle. It raises and lowers.


I think he used a sw not suitable for his car, start the engine - so immo off is ok - but working bad.
I speak from experience. I never change the sw in the flash, virgin the car sw, and never had problems of bad working.

[mellon]

Tomorrow program the original file and unlock immo by code and I will check rpm. The file is made from Ziko based on my original. He Fill FF from 4000h to 8000h and there are two short changes by 4 characters below 8000h , I do not remember exactly where because I am at home.

[alfabit]

Tomorrow program the original file and unlock immo by code and I will check rpm. The file is made from Ziko based on my original. He Fill FF from 4000h to 8000h and there are two short changes by 4 characters below 8000h , I do not remember exactly where because I am at home.

Only 4000h - 8000h > FF , no other bytes need to be changed.
This is the immo flash sector, others sectors in the flash affect the engine work. I repeat : do not change other bytes ! And use emu, safest method.

[ziko]

Only 4000h - 8000h > FF , no other bytes need to be changed.
This is the immo flash sector, others sectors in the flash affect the engine work. I repeat : do not change other bytes ! And use emu, safest method.

Hehe, I made many sirius32 for me and for my friends.... and noone complains ;)
Noone used emulator.....

[mellon]

Client said that the engine worked so strangely before immo problem.
Very very thanks.
Adam

[bangreno]

:captain:
Hehe, I made many sirius32 for me and for my friends.... and noone complains ;)
Noone used emulator.....

Please can you made this Sirius 32 Immo off.
Already tried to put fill FF from 4000 to 8000 , engine start but only two cylinder working , no ignition on the other .
here's my original and modified.
Please can you Check and help me.
Car is 1.4L , ECU reference is Sirius 32 S110030306

[JOSEPH1975]

Hello,

i have CLIO 1.2 8V with AC without can. I tryed some solutions, it starts but problems with dashboard (RPM and Oil).

Have you some solutions?

Regards.