dm7000 boatloader needed

[jcdavo]

i have had to jtag my dreambox with home jtag 100ohm resistor through the printer port and i used jtagwin5*** .i have connected ok and uploader file ok and all seemed ok but she still wont boot but can connect to dreamup though coms port but when i connect it shows box type dm 56** so the bling file (bootloader) must have been for wrong dreambox .i have been searching for 3 days now and can not find the proper files for a dm7000 any i find r deadlinks

can anyone help

davo

[Devilfish]

Dm500, Dm56xx and Dm7000 images are all the same; enigma1, so you might be ok to flash an image now. I'll have a look for a specific 7000 bootloader though.

[jbvid]

@jcdavo
Hi
Found one for you to try, let us know if it works ok.
jbvid

[jcdavo]

no sorry it comes up not valid archive when i try to unzip it

[jbvid]

no sorry it comes up not valid archive when i try to unzip it

Hi
Try it again now, I have rar'd in after unpacking it from being a zip file.
jbvid

[bobon5106]

hes another to try if that one dosent work

[faz666]

I seem to be having the sam issue with my DM700, i just need to do a quick post so I can download the bootloader.

[jcdavo]

i got her sorted with the second bootloader listed

[washburn]

I have also screwed my bootloader on my dreambox 7000. I emailed Dream multimedia who want me to send it back to them and they will do it for 20 Euro. Problem of course is its no doubt going to be gone for the best part of a month if not longer. Cannot find anything on the net. Plenty of schematics for a JTAG but no uncorrupted bootloaders. Seems I will just scrap it and sell it on ebay...

Sorted it....

[stangman]

as jcdavo referred to the second bootloader, going to try the same thing.

Funny thing is I already jtagged my DM7000, and now the display powers up, and goed to sleep mode, after 30secs it will wake up and go to sleep again,
no communication with dreamup or anything else.

Cross fingers and hope this bootloader will fix it ...

[jcdavo]

if anyone is looking the file i used here it is
ps if it does not attach pm me and i,l email it to you.

davo

[Nick_28]

DM 7000 - nothing else, just orange display. What should I do? Where do I find a diagram for jtag? A bin file?

Kind regards

[Nick_28]

No ideas? Is there any capacitors needed to be changed? I had a Kaon 570 with such a problem - the jtag did not changed anything but 2 capacitors in psu fixed it.

[resofty]

i have the same problem, i will test the second bootloader , i`ve tried everything i found on the internet and the same result , either the box did not start or ive got this far:
Dreambox DM7000
loaded at: 00500000 00614170
relocated to: 00400000 00514170
board data at: 00512124 00512170
relocated to: 00405194 004051E0
zimage at: 004058D5 0051158D
avail ram: 00515000 02000000

Linux/PPC load: console=null root=/dev/mtdblock5 rootfstype=squashfs ro
Uncompressing Linux...done.
Now booting the kernel

[bimo]

nead boot loader to db 7000

[bimo]

Hi
Try it again now, I have rar'd in after unpacking it from being a zip file.
jbvid
how to download?????????????????????????????????????????? ????????????????????????????

[gmb45]

all the files in this thread have been lost when we moved server, if u need them check to see if they are in downloads or pm the member who uploaded them to ask them if they could re-upload them, sorry

[decept]

I have a jtag cable I made for a CubeCafe-Prime will it work for a DM7000s?

[resofty]

This bootloader worked for me(it includes the jtag tool)
4shared.com - online file sharing and storage - download JTAG_Windows1.rar (http://www.4shared.com/file/259766557/759dfae8/JTAG_Windows1.html)

This is another bootloader that i found on other websites and workes too(probably the same).
4shared.com - free file sharing and storage (http://www.4shared.com/file/E203ws2H/Bootloader_Reparatur__Final_.html)

My dm7000 had two problems , my bootloader was broken and a gate on the serial buffer was burned, ive used another gate on the buffer, a clean bootloader and surprize, it works.

[bmw98]

Seem to be a common problem with dm7000. Thanks for the soft!

[ljungh]

I have bought a old dm7000s and in the display it only comes up Dream multimedia nothing else? is it the bootloader that has been crashed?

[benny/9]

I have bought a old dm7000s and in the display it only comes up Dream multimedia nothing else? is it the bootloader that has been crashed?
********************************************
have you tried to flash a image that failed?
remember you only use a boot loader if the
boot file on the box is corrupt.

[Ezel86]

My Dreambox DM7000S boots up but after it has booted, the screen gets black and displays "Dream Multimed 1.10" on the display. Have used DreamUP to reflash with another firmware for DM7000s, but no luck. The problem is still there.

This problem happened randomly after I was searching for channels, turned off the box and started it up again.
What can the problem be? failed bootloader? If this is the case, what do I need to do? Have not tried these bootloaders yet, but is it just to use the files above with DreamUP, nullmodem cable and crossover?


Thanks for your help.