Ford Expedition 2002 HC11 power up

[Hanukkah]

Hi,

Anybody have bench power-up connections for a 2002 Ford Expedition with HC11 mcu (white board after back plastic cover removed).

Not the green board with PLCC52 HC11 mcu.

Thanks.

[benzstop]

here you go, hope this helps

[afitijuana]

It won't gona show the milage the only think you will se are - - - - - - - in the display. Just in case you will try to correct it.

[Hanukkah]

here you go, hope this helps

Thanks mate...

Orange - 12v
Black - ground

Will try...

[Hanukkah]

It won't gona show the milage the only think you will se are - - - - - - - in the display. Just in case you will try to correct it.

This cluster I think has corrupted flash area. UPA reads correctly the eep part. Mileage is intact. After correction no mileage displays.

Anyone can help? Thanks...

[benzstop]

you may need to program keys

[Hanukkah]

you may need to program keys

If I put in a surplus cluster I might need to do alignment adaptation using IDS...

But I want to try and get this one working first. Just for the challenge of fixing it... if could be fixed. I have the original eep backup though. Just was not counting on Enigma to corrupt Flash or boot area on this one.

[vergel]

You mean the meter was damaged by enigma? how?

[Hanukkah]

You mean the meter was damaged by enigma? how?

Connect wire. Read and edit mileage. Put back in car. That kind of damge mate. ?

This job we do deals with electronic data. Sometimes human error, sometimes equipment glitches, sometimes its just that shit happens.

[hcip]

Connect wire. Read and edit mileage. Put back in car. That kind of damge mate. ?

This job we do deals with electronic data. Sometimes human error, sometimes equipment glitches, sometimes its just that shit happens.

I think its not a problem with the tool or the user,
It just a bad luck, have you did it last Friday 'd 13th ? , he he he

[Hanukkah]

I think its not a problem with the tool or the user,
It just a bad luck, have you did it last Friday 'd 13th ? , he he he

Saturday the 14th is the new Friday the 13th. Watch out for Freddy's movie rensmed. Hehe

[afitijuana]

If you try to do it in the bench it wont gona show any numbers, try it on the vehicle. Some times will take a cople minutes after you install intion the car let it iddle for a while, If this wont came on try to solder the world famus coold solder points. another clue is the car start fine with the cluster on the problem may not be the cluster cause the car wont run with out it. In the case that has PATS ON IT.

[Hanukkah]

Anyone have or can get full dump using etl hc11 programmer would be appreciated. Thanks.

[Hanukkah]

Moderators can close this thread.

Car fixed and running.

Those who have enigma and want to know what could have caused this PM me.