Focus Airbg 2M5T-14B056-DE Crash data

[Aspins]

Could someone be able to clear the crash data for me please from a 2M5T-14B056-DE dump from a 912D60.

Thanks

Keith

[ovi_dk]

Can u update the file please?

[Aspins]

Forgot to upload file,it's done now

[ovi_dk]

Here its your file..

[Aspins]

Thank you very much

Appreciated

Keith

[Aspins]

Original dump the airbag light fashed 12 ( crash data buffer full ). With the cleared dump it flashes 13 ( dignostics says airbag module micro failure )

Any ideas as I am at a loss now.

Thanks

Keith

[ovi_dk]

Strange,this solution its tested,mut to worck,reed onesagin your dump and post here,tosee the diference
.B.r

[ovi_dk]

Put this file inside and tellme wats happen.
B.R

[Aspins]

These are the only files I have now,the original and the one you cleared.

Thanks

Keith

[Aspins]

The only difference I can see is last two bytes of the original dump 1008-14,15,takeing 656-0 to 848-11 as the loaction of the crash data.


Keith

[ovi_dk]

Try the file wath i send u,rwite in your module,and tellme if u get any error.

[Aspins]

Have done that but will not be able to test till tomorrow,then I will report.


Keith

[Gargamello]

OVI-DK file is good

[Aspins]

ovi_dk the first dump was correct works fine.

The problem was me,the chip must have had a dry joint hence the error message ( dignostics says airbag module micro failure ) which was a big clue :stupido:

Thanks again

Keith