PDA

View Full Version : Help with 2010 Honda Accord


OdoFix
17th January, 2012, 05:03 PM
Hello Everyone,

I was wondering if someone can assist me please. Recently, anytime I have tried doing an 08- Honda Accord with UPA, I have problems with it. It doesn't read.

I have the Diagram with Connection points on Enigma (Attached Here) and this doesn't work. MY SOLDER IS GOOD. I have tested 1000 times.

Can anyone give me solder points other then enigma or any recommendations please.

Thank you
OdoFix
drpeter
17th January, 2012, 05:20 PM
Hello Everyone,

I was wondering if someone can assist me please. Recently, anytime I have tried doing an 08- Honda Accord with UPA, I have problems with it. It doesn't read.

I have the Diagram with Connection points on Enigma (Attached Here) and this doesn't work. MY SOLDER IS GOOD. I have tested 1000 times.

Can anyone give me solder points other then enigma or any recommendations please.

Thank you
OdoFix

UPA can not read this chip onboard without a ''special adapter".....
CARPARTS
17th January, 2012, 05:34 PM
Connections are oke, its a 93C76
use the simple seeprog from elnec, works 100%
OdoFix
17th January, 2012, 05:38 PM
UPA can not read this chip onboard without a ''special adapter".....

I have tried with UPA USB with In-Circuit adapter purchased from ebay. What other special adapter do I need?
afitijuana
17th January, 2012, 05:42 PM
Those selling on ebay are not for read in circuit. Sear arround to find out about them.
OdoFix
17th January, 2012, 05:42 PM
Connections are oke, its a 93C76
use the simple seeprog from elnec, works 100%

Do i need a special adapter with this .. or will this work stand alone?

thanks
OdoFix
17th January, 2012, 05:44 PM
Those selling on ebay are not for read in circuit. Sear arround to find out about them.

UPA USB Programmer - Dongle And Lead Connector Set | eBay (http://www.ebay.co.uk/itm/UPA-USB-Programmer-Dongle-And-Lead-Connector-Set-/180784408629?pt=UK_AudioElectronicsVideo_Video_Tel evisionSetTopBoxes&hash=item2a17972835#ht_1327wt_1139)




5) 95xxx, 35080 and 93Cxx In Circuit Dongle - This world first dongle is designed by us and is used along with the other supplied device dongles, clips and leads to allow in-circuit reading and writing (in virtually all cases) of these devices. This is a very useful dongle that really makes the UPA USB programmer usable in most real world situations.

It sure says it is!