View Full Version : Clone Duo Open pli (kernal 3.0)Oscam-cccam sky uk Cooltv

18th January, 2012, 04:41 PM

Here is my atempt at a fully working clone ready image. with no password set. sky uk fav crossepg setup cooltvguide setup. backup suite setup.

cccam = etc/CCcam.cfg
oscam = etc/tuxbox/config/oscam-stable/server.oscam

back it up when you got it set up by useing a usb pen with a text file called backupstick.txt
this only takes 4 mins
you will find it in plugin called Full back=up to USB

1st September, 2012, 08:25 AM
mate i am trying to setup oscam/cccam on my vu+duo running blackhole but i just can't get it sorted can you help me please.

1st September, 2012, 09:20 AM
mate i am trying to setup oscam/cccam on my vu+duo running blackhole but i just can't get it sorted can you help me please.
Oscam files config.rar (http://www.mediafire.com/?3343400nfon2wqh)
these are the 4 basic files needed to get oscam to work as a client. open the oscam.server and edit the detail to match your cccam details. these all go into the proper dir. give it atry m8.:fight:

1st September, 2012, 09:25 AM
i have just don't this with other files so not tryd these yet mate,I am clearing channels but not sport and movies and hd,what am i doing wrong mate.
thanks your help

1st September, 2012, 09:37 AM
are you useing the duo as a server? if so you need the box id from off the bottom of your sky box.

1st September, 2012, 09:49 AM
yes mate and i got the box id

1st September, 2012, 09:51 AM
yes mate but with cccam

1st September, 2012, 09:53 AM
In oscam.server you need something like this.

label = skyuk_full_hd_2
protocol = smartreader
device = 001:003
device_out_endpoint = 0x82
smargopatch = 1
fallback = 1
caid = 0963
ecmwhitelist = 0963:3E,4E,42,44,45,47,6A,6B,6F,62,68,69,7C,7D,7E, 72,73,77,79,80,8B
detect = cd
mhz = 480
cardmhz = 500
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
lb_weight = 100

auprovid = 000963

1st September, 2012, 09:56 AM
so i could jus copy that mate

1st September, 2012, 09:59 AM
would i need to put anything in cccam config apart from flins,Like an Nline or something

1st September, 2012, 10:07 AM
I don't use cccam anymore all my cccam clines are handled by oscam. no need for cccam any more. much faster more user freindly and more configurable than cccam.

1st September, 2012, 10:10 AM
nline is from cccam to another cccam

1st September, 2012, 10:26 AM
what do i putin for pass mate and do i change the port

1st September, 2012, 10:51 AM
ok so i don't need oscam to cccam so where do i put my flins,sozz for being so thick i know some stuff but this is bait confusing at the min.

1st September, 2012, 10:57 AM
mate what do i put in here.# Edit by Diamondear #
# Release 0.1 04/05/2011



cachedelay = 200

nice = -1

preferlocalcards = 1

waitforcards = 0

request_mode = 1

# Front Led QBOXHD(Mini): enable led = 0 - disable led = 1

disableqboxhdled = 0

# ------ LOGGING USER ------

usrfile = /var/oscam/log/user.log
disableuserfile = 1

# ------ LOGGING OSCAM ------

logfile = /var/oscam/log/oscam.log
disablelog = 1
maxlogsize = 1024


port = 988

aulow = 120

monlevel = 1

enabled = 1

au = 1

boxtype = amiko

user = dvbapi_amiko


httpport = 9999

httphelplang = it

httpuser =

httppwd =

httpcss = /var/etc/oscam/webif-template/site.css
httptpl = /var/etc/oscam/webif-template
httprefresh = 5

httpallowed =,,,

#httpdyndns = myhostname.dyndns.com

1st September, 2012, 11:24 AM
oscam.user =flines ie you give
oscam.server =clines ie you take
look at the file i gave a link to.


user = mym8
pwd = XXX~~~~13e
description = any description you want
group = 1
uniq = 1
cccignorereshare = 0

send me your msn and i will see if i can help you better.

1st September, 2012, 11:38 AM
so i won't need to use cccam when iv done that and when i have done that should it work mate,Im not on man mate but you can have my email if you want.
thanks pal

1st September, 2012, 11:40 AM
it is far quicker to be on msn and get it sorted real time rather than wait for you to find open read anawer the email

1st September, 2012, 11:55 AM
i will try and get msn mate

1st September, 2012, 11:56 AM
no problem m8

1st September, 2012, 01:20 PM
This is taken from another forum.

Here are the contents of my four files:

This for Sky UK card in upper card slot with Oscam5953/CCcam213. This is running under Blackhole 1.6.5 but I don't imagine Vix it too much different.

There are 4 files:

CCcam.cfg in /etc
oscam.conf, oscam.server & oscam.user all located in /etc/tuxbox/config

CCcam.cfg (if you are already running CCcam, back up your working settings BEFORE you install the new cam).

BOXKEY: /dev/sci0 XX XX XX XX

N: 12000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

(I left my boxkey in initially so that this file would work with both CCcam alone or OscamCCcam but you can remove that line later if you want, once you get it all working)


nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed =
# protocols
key = 0102030405060708091011121314
port = 12000@0963:000000;12001@0963:000000

(the line httpallowed includes all private network IP adresses or you can just replace this with the ip address of your box. This will allow you to look at the web interface via your browser so if the ip address of your box is then in your web browser you would type (8888 is the port number that it is using). The username and password are both "admin".


label = slot1
protocol = internal
device = /dev/sci0
boxid = 00000000
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

(Whilst this config does not require a boxkey, I found that it will not work if you completely remove this line. I just put 8 x "0" here and it works for me).


user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963

Make these 4 files, and place them in the folders I have mentioned, either with explorer or with FTP. When you have copied the files there, double check that the permissions are correct. With Filezilla, right click the files, and make sure the numeric value is set as 755 Double check the permissions for /etc/tuxbox/config are the same also. If you use Windows Explorer, right click each file (and the Config Folder) and make sure the read/write permissions are the same. Then go in and make sure that oscam/cccam is set as your default cam.

Switch your box off, and then back on again and let it start up. I shut my box down on one of my subscription channels and thought it wasn't working because the picture didn't clear instatly, but it took a couple of minutes to sort itself out and clear the my subscription channels. This delay is only for the first time you start the box. Further shutdowns and restarts clear subscription channels almost instantly.

If it clears OK then you can view your entitlements via the web interface.

Hope this is of some use.

1st September, 2012, 01:28 PM
ill try that pal thanks

2nd September, 2012, 11:12 AM
hi mate i have done all this and its saying in oscam.ms) (of 0 avail 0) (no card support 0963:000000)
Its clearing channels but not sport.

2nd September, 2012, 12:18 PM
hi mate i have done all this and its saying in oscam.ms) (of 0 avail 0) (no card support 0963:000000)
Its clearing channels but not sport.

try oscam 6059... is it saying card or network when it clears a channel? regards mdt

2nd September, 2012, 12:45 PM
in oscam its saying no card support mate

4th September, 2012, 05:14 PM
ok i have got it running now with the files of a 500 that was running oscam/cccam and it seems ok,Its setup in my living room but when its gets moved to a new location on my network oscam won't work and i don't know why, its only been moved 30 feet away,?.Running Oscam5953/CCcam213
where do i look for the ECM times.
thanks lads

23rd January, 2013, 06:16 PM
Will this also work with a genuine VU+ SOLO 2?

23rd January, 2013, 06:46 PM
try it mate

24th January, 2013, 01:40 AM
I am new to all this so my question is if I input all the text you wrote into telnet will it do whats needed for all sly channels to unlock as thats what I am after its just for testing out what the box can do though and I have a vu+ solo 2

24th January, 2013, 07:10 AM
Anyway I tried this image and for some reason all the FTA channels dont work well on my genuine box but all the extras in this image make it super so I wish it worked on my unit