wacko
19th January, 2012, 03:41 PM
http://i.imgur.com/Gxest.png
FiatECUScan 3.3
22MB
FiatECUScan is a diagnostic tool for Fiat, Alfa and Lancia vehicles.
ELM 327 INTERFACE WARNING:
Please note that almost all ELM 327 interfaces produced in the last few months have problems accesing the CAN network. The problem can be easily fixed by simply removing one resistor from the interface. The procedure is included inside the archive. The OBDLink interfaces have a software problem and will be fully supported by next version of FiatECUScan.
If you have an earlier version installed on your computer then you don't need to uninstall or deactivate it. Simply download the latest version and install it. It will upgrade your current installation and take the license data from it!
This diagnostics software allows you to perform various diagnostics of the supported modules. Diagnostics is performed via k-line (VagCom), ELM 327 1.3(or later) or OBDKey 1.40 interface connection to the vehicle's OBD connector (which is located near steering wheel) or to a manufacturer-specific connector (for older, pre-2000 cars). You need to have a k-line (VagCom), ELM 327 v1.3 (or later) or OBDKey v1.40 interface cable in order to use this program. Bluetooth OBDKey and ELM 327 interfaces are supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
Multi: Bulgarian, Chinese, Croatian, Czech, Danish, Deutsch, Dutch, English, French, Greek, Hungarian, Italian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-CIR, Slovenian, Spanish and Turkish .
Link:
http://www.fileserve.com/file/PeTmrXk
or
http://www.filejungle.com/f/6vcMKd
FiatECUScan 3.3
22MB
FiatECUScan is a diagnostic tool for Fiat, Alfa and Lancia vehicles.
ELM 327 INTERFACE WARNING:
Please note that almost all ELM 327 interfaces produced in the last few months have problems accesing the CAN network. The problem can be easily fixed by simply removing one resistor from the interface. The procedure is included inside the archive. The OBDLink interfaces have a software problem and will be fully supported by next version of FiatECUScan.
If you have an earlier version installed on your computer then you don't need to uninstall or deactivate it. Simply download the latest version and install it. It will upgrade your current installation and take the license data from it!
This diagnostics software allows you to perform various diagnostics of the supported modules. Diagnostics is performed via k-line (VagCom), ELM 327 1.3(or later) or OBDKey 1.40 interface connection to the vehicle's OBD connector (which is located near steering wheel) or to a manufacturer-specific connector (for older, pre-2000 cars). You need to have a k-line (VagCom), ELM 327 v1.3 (or later) or OBDKey v1.40 interface cable in order to use this program. Bluetooth OBDKey and ELM 327 interfaces are supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
Multi: Bulgarian, Chinese, Croatian, Czech, Danish, Deutsch, Dutch, English, French, Greek, Hungarian, Italian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-CIR, Slovenian, Spanish and Turkish .
Link:
http://www.fileserve.com/file/PeTmrXk
or
http://www.filejungle.com/f/6vcMKd