PDA

View Full Version : sat update on tm6800hd


radders58
19th January, 2012, 03:59 PM
:oAnyone know how to add new sats to 6800hd sat list,I want to add astra1n.
Cheers
dick b
19th January, 2012, 04:26 PM
:oAnyone know how to add new sats to 6800hd sat list,I want to add astra1n.
Cheers

no need to add as a separate sat go to 28.2 E then menu>installation>satellite setup>green button"rename" then use the virtual key board to rename I used "astra2/1n E/bird"(you run out of spaces if you try and put too much in)
radders58
19th January, 2012, 04:47 PM
Cheers,but will that get ch5 back on,dont even have it in listings now????
dick b
20th January, 2012, 01:49 PM
Cheers,but will that get ch5 back on,dont even have it in listings now????

menu>installation>advanced search>ok,drop to transponder line and scroll to 10.964H 22000 then scan this will give channel 5 and its derivatives.(if its not there green button add TP)
just to add CH4 HD is also on 1N 11.126 V 22000 DVB-S2 8PSK 2/3 pilot on.
radders58
24th January, 2012, 02:49 PM
menu>installation>advanced search>ok,drop to transponder line and scroll to 10.964H 22000 then scan this will give channel 5 and its derivatives.(if its not there green button add TP)
just to add CH4 HD is also on 1N 11.126 V 22000 DVB-S2 8PSK 2/3 pilot on.

Cheers dick,will give it a try.....Alan.
radders58
24th January, 2012, 03:47 PM
tried to add tp 10-964 h but wont let me chage from v to h,says transponder exists ???
dick b
25th January, 2012, 12:59 PM
tried to add tp 10-964 h but wont let me chage from v to h,says transponder exists ???

then scroll through the transponders carefully because as it says the "H" version is already in there somewhere,the frequency may be slightly different say 10.965 or the like.you dont need the "V"TP
Carew6
25th January, 2012, 01:25 PM
You may have to delete the 10.964V transponder first before trying to add the 10.964H transponder.
dick b
25th January, 2012, 04:42 PM
You may have to delete the 10.964V transponder first before trying to add the 10.964H transponder.

No it will accept both "V"&"H" versions of the same transponder number. but will show "transponder exists" if its already in there.
althom40
25th January, 2012, 07:13 PM
When you get to the polarization selection, first press OK.
A little window opens with both H and V in it. You can now select what u want.