2012 Kia rio 95910-1w200, 25c128

[acr1975]

Need help to clear crash data.25c128

95910-1w200
1w959-10200, mobis, or
5wk44351

Thanks in advance

[ChipGods]

Need help to clear crash data.25c128

95910-1w200
1w959-10200, mobis, or
5wk44351

Thanks in advance

attached.
please try and send result.

[acr1975]

yor file is not working.....can u try another one?

[AMLGAR]

TRY THIS..:joyman:

[ChipGods]

yor file is not working.....can u try another one?


not working means what? no communication or crash?

[acr1975]

It's 2012 car, and i don't have the scanner for it, however i know that all the airbags and seatbelts are good, so it should be reset by itself, thats why i told you dump is not working, any advise?

[ChipGods]

It's 2012 car, and i don't have the scanner for it, however i know that all the airbags and seatbelts are good, so it should be reset by itself, thats why i told you dump is not working, any advise?

It's 2012 car, and i also don't have the clear dump for this unit type. so editing is based on comparing crashed dumps, and without the scanner or clear dump it will be hard to do something.

[acr1975]

you are right, is there anyway to read the trouble codes?

[AMLGAR]

autoenginuity version 10.0 can do it as 2011

[acr1975]

i will try.

[acr1975]

i just got the auto enginuty but it doesn't cover 2012!!!so Don't know what to do?

[AMLGAR]

you need version 10.0, you can read it as 2011.
OE-Level Coverage (Enhanced Interfaces) (http://autoenginuity.com/products-software.html#EI09)

[acr1975]

So, u mean change the 10.02 to 10.0? ok then i try.

[acr1975]

i tried on 10.02, and used the 2011, didn't communicate....i try to get the 10.0, if it works.

[visavis88]

hello, friends. i have the same module. could you help me to clear the crash data from it please?

[kolocar]

hello, friends. i have the same module. could you help me to clear the crash data from it please?
This is my fix by hand, without recourse to the software ,so it's not necessarily correct, but worth a try,good luck

[visavis88]

thank you kolocar. tried both variants, but the light goes off and then on. damage was light, only driver's airbag and seatbelt. front sensors were not touched, so i assume there is no problem with the car(unless some occupant sensor programming needed).

launch with latest update for Kia 41.60 doesn't communicate with this car. if anyone has tested solution, i would be glad to trade it for something similar. thank you

[ercan]

not working means what? no communication or crash?

[titosairbagsvc]

2012 Kia Rio 95910-1w200 25128 airbag need clear crash, thanks