Writing VIN in Micronas dash passat b6

[Fec001]

Hi!
I would like to write new VIN to this dash with xprog m but the VIN option is always gone when I read the dash. I mean this--->http://kepfeltoltes.hu/view/120122/5...toltes.hu_.jpg (http://kepfeltoltes.hu/view/120122/5918233562_www.kepfeltoltes.hu_.jpg)
http://kepfeltoltes.hu/view/120122/9...toltes.hu_.jpg (http://kepfeltoltes.hu/view/120122/9747239731_www.kepfeltoltes.hu_.jpg)
any solution?

[exe123]

Passat 3C has no immo in dash.So no VIN here!

[Fec001]

vcds writes VIN in immobiliser, I tought immo is in dash.....

[exe123]

Immo 25 is in central conv. ecu 46 on passat

[Fec001]

is it possible to change VIN?

[vuno01]

sure its possible
why don you just post your dump

[Fec001]

first I'll try to do it through diag.

[Fec001]

Immo 25 is in central conv. ecu 46 on passat

You mean Central comfort control modul behind the glove box?

[exe123]

You mean Central comfort control modul behind the glove box?
yes, dump is crypted eeprom 95320

[Fec001]

yes, dump is crypted eeprom 95320

Here is the dump I would like thids VIN: 3CZ6P030107

[Fec001]

anybody????

[Fec001]

Somebody knows it where the VIN is in the dump?