upa-usb m35080 & 95160 problems

[dave11674]

hi guys

im just having a play with my upa usb
making some adapters n leads up so i can swap n change at ease.

ok so i beleive the 2 said chips are both using the exact same pin configuration.

m35080 will read/erase/program just fine
but when i try do anything with these 95160's i have its not doing jack
i mean if i take the chiop out the progger aint even detecting this ?!?!

like i say it will do m35080 just fine
but not these chips

any ideas ?

thanks

dave

[remhonda]

hello
35080 95160 chips and have different connections on this you can not read and erase the chip. for it will make a separate adapter .... If I understand your problem ....

[dashradio]

I have 2 different adaptors for 35080 & 95XXX

[dave11674]

ahh ok
what about 93c and 24c ?
do i need a sep adapter for all these also ?
i know some can be same
i checked teh connection on teh software and both m35080 and 95160 were same pinouts ?!?!?
how can this be then ?

thanks

dave

[captain crackers]

Check again, 35080 has gnd on pin 1. 25/95 has gnd on pin 4, also 35080 uses 7 connections and the 25/95 uses 8. Cannot be the same wire up! Arthur.

[dave11674]

i did this mate
i selected m35080 on the software
wrote down pins n connections
did this for 95080 and same !1!!!

ill go look again hehehe

dave

[dave11674]

guys ive checked in teh software
and double checked
the connections tab for m35080 and 95160 are both the same

so whats going on
either the software is wrong
and or i dont have pinouts for 95160 in the manual
35080 is there but nothgin for 95160

anymore ideas ?

dave

[dave11674]

so if im not mistaken
the m35080 is wired up as said
and the 29/95 chips use the SPI wiring ?

i think im with it now

dave

[captain crackers]

Just a little clue, click on help/contents in the program window and you will find all the wire ups you will ever need. Arthur.

[dave11674]

yeah thats wat im following now :)
im making my soic test clip to go directly into the UPA for M35080 but attaching the extra wire thats not used to pin 8 as that is used for both 93c and 95/25 so i can make 2 adapters up for them :)

thanks for the help guys
much apreciated

dave

[diga1]

last day i tryed to read 95160 and always failed by werifing so i think there is a bug in software

[dave11674]

i have the adapters sorted now thanks :)

i have my main clip as m35080 and make my other adapters accordingly with wires moved around in the adapters

all good
35080 read/write
95160 read/write

just need to make the microwire adapter now :)

thanks agian guys for the help

dave

[captain crackers]

Glad to heard you are in action with your UPA now. One thing I would suggest is, as you will be reading most eeproms off the board, a zif socket is a far safer option to a soic clip for reading and writing. Soic clips are renowned for firing eeproms into orbit. Arthur.

[TULGEYWOODMAN]

I think upa users need to buy a full set of adapters to enable reading eeproms on board.
For the price paid, it would save $$$$$?????? in time and tears!

Captain Crackers sells them. I know he is too modest to say it on here!

[dave11674]

Soic clips are renowned for firing eeproms into orbit. Arthur.

oh i hear you there mate :)

i tried to read a honda civic 93c76 2007 today on board
wouldnt read anythgin in lol
tried it on 93c76 and 93c76 x16
wouldnt bring forth any data

no worries

thanks again guys

dave

[TULGEYWOODMAN]

oh i hear you there mate :)

i tried to read a honda civic 93c76 2007 today on board
wouldnt read anythgin in lol
tried it on 93c76 and 93c76 x16
wouldnt bring forth any data

no worries

thanks again guys

dave
funny that,
did a 2011 civic type s today and a 2010 civic, both c76 , both on board, both 3 minutes, both dp3

[captain crackers]

Dave, have a look at this on Ebay, Item number: 180784408629. Arthur.