PDA

View Full Version : clio 2 sirius 32 flash read tool



johnie-9
25th January, 2012, 08:04 PM
Hello everyone!With which tool can we read the flash of a renault clio 2 1.4 8v sirius 32 ecu?

omglol
25th January, 2012, 08:57 PM
Programmer like Elnec Beeprog, Galep, Batronix BX48 ...

johnie-9
25th January, 2012, 09:07 PM
only desolder and read?nothing by obd plug like galletto 1260 or spi28?

omglol
25th January, 2012, 09:31 PM
There is a word on the street original galletto can do it ... but clone surely can't.

ecutuners
25th January, 2012, 09:55 PM
Galletto clone with L-Line works with them

johnie-9
25th January, 2012, 10:08 PM
in my case it doesn't. I have a galletto 1260 clone connected like that, I also connected it in the car obd plug, but didn't connect. Could it be that, because I have an immo problem and the engine won't start, blocks the connection between the ecu and galletto? I am thinking, could it work if I connect an emulator at pin 58?

omglol
25th January, 2012, 10:21 PM
Galletto clone with L-Line works with them

Where is this to be found?

kevfield
25th January, 2012, 10:54 PM
Can read with clone galletto but must make ground to boot pin .

Thanks kev

kareszka
25th January, 2012, 10:55 PM
One little help.

johnie-9
26th January, 2012, 08:20 AM
one question:we lift the pin up and the solder, or it doesn't make a difference?

matekhr
26th January, 2012, 09:20 AM
No need to lift pin.

johnie-9
26th January, 2012, 01:08 PM
well, nothing happened so far.i think that this is not the boot pin for my ecu because i have sirius 32,not sirius32n.i found something searching in google. does it works with galletto clone?

kti1970
27th January, 2012, 02:51 PM
Hi guys I tried this possibility bootmenu no goes.

rasequia
27th January, 2012, 06:23 PM
There is also solution with the simplest KKL interface and software ddt2000 for this type ecus(for reading full flash-29f200bb).

johnie-9
27th January, 2012, 06:49 PM
and where can we find this kkl interface and ddt2000 software?

rasequia
27th January, 2012, 07:05 PM
KKL interface is very simple to build but it is easier to buy from chinese,ddt2000 find the forum here.

sorgun
27th January, 2012, 07:29 PM
util-soft.myforum.ro ddt 2000 interface and software

kareszka
28th January, 2012, 10:57 AM
Why not solder out flash from PCB.With hot air its very simple.

alfabit
28th January, 2012, 11:25 AM
There is also solution with the simplest KKL interface and software ddt2000 for this type ecus(for reading full flash-29f200bb).

M8, please post here a dump from a memory AM29F200 read by DDT2000 sw and KKL interface !
I can show to you a file read with DDT2000 and KKL interface 546 kB in .s ( motorola format )
All i want to see from you is a dump 256kB in hex format, please. ( C0, F0, E4, CA ....and so on )

rasequia
28th January, 2012, 12:48 PM
546 kb s-file motorola convert into hex file and result 224 kb.I did not say I have like something, I said only that it is possible to read full flash.
Problem is in btp data base and if anyone's interested we can work together to solve read full flash.Are now advanced enough to solve this problem.

alfabit
28th January, 2012, 01:34 PM
546 kb s-file motorola convert into hex file and result 224 kb.


Really interesting... 224kB + 32kB ( tuning sector of flash ) =...guess what ... 256 kB ! :hmmmm2:

rappttor
28th January, 2012, 03:26 PM
this is an easy ecu...there are several option to read it, and yes ddt is one of the most cheap and secure choice...you just need to unlock ddt to do it.

alfabit
28th January, 2012, 04:01 PM
this is an easy ecu...there are several option to read it, and yes ddt is one of the most cheap and secure choice...you just need to unlock ddt to do it.

Can you name those options ? We are interested in this matter.
You can skip ddt, we know that choice, unlock...