Toyota RAV 4 second key programming

[koziolek]

I have a customer with
2006 Toyota Rav 4
vin #JTMBK31V165004441

2007 Yaris

vin #JTDKT923375051548

both cars have only one key he wants to send those cars over seas but need to program additional key for each car .
can someone tell me how to do it
please

[sogaro]

What tool have you to do this job? Are both working keys Black (Master) or grey. This info will determine your preferred solution

[koziolek]

the working key are black that's what he has

[ray-ray]

No on board programming with master with 4D? Orange dongle should do the job. Just reset and add 2 keys master 4D67 &1 valet to close or cycle 5 time and step on the brake.

[koziolek]

can You be more specific please

[ray-ray]

4C keys lexus or toyota first generation, if you have a master (pedal dance to add keys).a master key is not black or grey it's the key that turn off the immo. Light as soon as it press the buzzer button.If there is a delay in the light turning off it is a valet (you can not add, must flash to virgin)

4D chip keys has logic between a master and a valet and there is no on board programming even if you have a master. There is only 1 exception toyota, sequoia there is on board programming if master is present.( key and door with a 2 min. Wait delay).

Orange dongle or toyota smart key programmer will program these cars with out any effort. There is plenty of posting on that tool do some reading.

[lashkar97]

you can tri programm key by onboard programing method if u have black master key
if u know onboard programing than ok if not than i can explian for u

[koziolek]

can this be done with Silca SBB key programmer?

[keygargoil]

yes if its 4d you can add a spare as long as you have 1 working master key t300 sbb, ad system 2