Problem audi A3 3200 v6

[eiemax]

hello all.
I have a problem with a audi A3, 3200 v6 250cv year 2004.
ECU me7.1.1 number 022 906 032 CA.
I read this with MPPS v5 (3.2L bosch me7.1.1 k-line) and modified the file.
When I when I started writing the file mod, mpps has not written for 3 times (impossible to write), I tried again, and now blocked ECU.
The car will not start, no ecu data with MPPS, the fans always on, and an error on the dash: faulty headlight height adjustment.
I tried to desolder the 29f800bb and rewrite the original file, but nothing has changed.
How i can solve with this ECU?
Thanks in advance :adore:

[ovi_dk]

Try to conect with mpps on beanch to this ecu and try to write back the original files,maybe in this way will worck,the pinout i guess you find in autodata.
B.R

[eiemax]

Hello friend
thanks for the reply, I tried to connect to the bench, but I can not even do "ECU Data" and I can not write.

[ovi_dk]

Try with a new 29f800 maybe its death.if u cant reprogramit.
B.r

[eiemax]

Hello friend ..
The first thing I did was put a new 29f800bb but nothing ....

[ovi_dk]

wow strange situation,and with the original one u dont have comunication?u tryit with programator?or just with mpps?

[eiemax]

Hello friend .... I tried to read mpps, Magpro 4.2, galletto (boot mode).... but I have not had any response from the ECU

[ovi_dk]

Tey with a programator,to reprogram your 29f800,its the only way to write ,maybe the cables can flash 29f800.

[eiemax]

I have tried to rewrite the 29F800 with the programmer. I unsoldered, written and resolder .... but nothing. No response from the ECU alone machine that does not start, fan always on, and error height adjustable headlights.

[vuno01]

have you checked all the fuses on the
car ?
maybe some are blown

[eiemax]

yes, the fuses are all ok.
I believe that the file of 95p08, is corrupt.
I am attaching the file you can check if it is ok or not?
thanks