Does where you can buy the ETL programmer?

[javiercj]

Do hello friends
can help where buy the ETL programmer?
do
the website of the manufacturer es:
http://www.etlweb.com/

he contacted them but there is no response

can you tell if the programmer for the family motorolla freescale 6811 hs912 and hc908

know if you can access the eeprom and flash works well?

And if the reading is done in circuit or out of circuit and if come schemes on how to connect?

Hope reply

thanks

[bram380]

Other option, safety tool for hs912 hc908:
xprog hardware original (http://www.xprog-m.com/) & software original (http://www.eldb.eu/index.php?route=product/category&path=35_38)

[javiercj]

Hi Javier Berasetegui...,
Other option, safety tool for hs912 hc908:
xprog (http://www.eldb.eu/index.php?route=information/infocategory&path=4_7)

NO THANKS

I AM TESTED THE PROGRAMMER XPROG AND I DONT WORKING

very thanks for your replay

[bram380]

Did you use original xprog authorization?

[javiercj]

Did you use original xprog authorization?

I am used the cloned xprog-m with authorized

i am working for eeprom but i dont working for mcu-eeprom

now does not work nor with

eeprom programmer and I need to work with mcu
.
the eeprom read and write with willen-g - 4 x

[ahadi]

........................................sorry

[ahadi]

the best programmers are ETL for professional use ,xprogm clone is big fake not stable . to buy from chinese:eek: you should compare prices and to give 30 lines address with all post codes to receive .

[bram380]

Do hello friends
can help where buy the ETL programmer?
do
the website of the manufacturer es:
http://www.etlweb.com/

he contacted them but there is no response

can you tell if the programmer for the family motorolla freescale 6811 hs912 and hc908

know if you can access the eeprom and flash works well?

And if the reading is done in circuit or out of circuit and if come schemes on how to connect?

Hope reply

thanks

Try to contact:
Alexey Goncharenko (http://www.digital-kaos.co.uk/forums/alex_etl@yahoo.com)

i got repply email 20-12-2011

[javiercj]

the best programmers are ETL for professional use ,xprogm clone is big fake not stable . to buy from chinese:eek: you should compare prices and to give 30 lines address with all post codes to receive .

Hello

thank you don't want the Chinese etl programmer, want the programmer original professional etl

want an original tool and works

[JustMeAgain]

ETL maybe good programmers but if you find it hard to buy one think how hard it will be to get support.

A business or product is only as good as the worst employee within a company. If the employee sucks then well......


Take a look on the xeltek site. Im sure you will find what your looking for.

Looks like a good support list to me here for an $845 programmer.

http://www.xeltek.com/software/sp500p/xsp500p.php

[javiercj]

Try to contact:
Alexey Goncharenko (http://www.digital-kaos.co.uk/forums/alex_etl@yahoo.com)

i got repply email 20-12-2011

thanks

but i send the email alex_etl@yahoo.com go two months

and i dont replay.

This morning I put a mail to all contacts of etl.

but I think that not me continue anything

I will send the mail only to

of anyway thanks



thanks

[javiercj]

ETL maybe good programmers but if you find it hard to buy one think how hard it will be to get support.

A business or product is only as good as the worst employee within a company. If the employee sucks then well......


Take a look on the xeltek site. Im sure you will find what your looking for.

Looks like a good support list to me here for an $845 programmer.

Xeltek inc. :: Supported devices for SuperPro 500P Programmer (http://www.xeltek.com/software/sp500p/xsp500p.php)

ok thanks

but it is professional

also

also does not cover all micros freescale 6811 hc912 hc908 motorolla

got you your, provide support and adapters for these micros

hope answer



thanks

[finixservice]

SOME INFO:X-PROG-M CLONE AND X-PROG-M ORIGINAL WORKS THE SAME.AFTER MANY TESTS I DONT SEE THE DIFFERENCE ENY.PLUS LAST DAY I TRY TO READ HC11F1 AND NO SUSSES WITH ENYONE OF THE TWO.FINALY ONLY WITH UPA.conclusion?ONE BIG COMPANY AS TNT create A big-ticket DEVICE AND STOP.NO ADDICIONAL ADAPTER FOR ON BOARD READ AS 4E28B SECURITY.THAT OTHER industry DO....

[koncimobil]

If you read conection hc11f1 carefully, everything will be ok.

[bonnieoran]

hi~
You can buy a eprom programmer here https://www.xeltek-cn.com/en/in-system-programmers
here you can see the devices supported by the ic programmer https://www.xeltek-cn.com/en/download.html
On the device list page, query e(e)prom or your device model to see if it is supported.
668674
Hope it helps you