PDA

View Full Version : VOYAGER 2.5TD 1999



CIRCUIT.FR
31st January, 2012, 11:38 AM
HI

I need immo off VOYAGER 2.5TD year 1999 ECU BOSCH 0281001768.
Here 24C02 dump:
https://rapidshare.com/files/3686351608/24C02_0281001768.ORI

You can immo off?

Thanks

CIRCUIT.FR
31st January, 2012, 06:35 PM
I have try modif same than cherokee but don't work.

Other idea?

CIRCUIT.FR
2nd February, 2012, 12:36 AM
nobody have same problem than me.....?

Zohar
3rd February, 2012, 11:09 AM
nobody have same problem than me.....?

ottocheck dump works fine, but you need replace original b58xxx eeprom on any 24C02 from Atmel or ST ( to set write protect - lift pin 7 of eeprom from board and connect to pin 8)

BR

Zohar
3rd February, 2012, 11:20 AM
try this dump (i have tested similar solutions on 0 281 001 708 and 0 281 001 333 ECUs)

marcoco
3rd February, 2012, 03:06 PM
You MUST change original 24c02 with 24c02WP .
Decoding your original file with ecuvonix,write on 24c02wp ,solder on ecu,lift pin 7 of 24c02wp and short 7 with 8 pin.

CIRCUIT.FR
13th February, 2012, 08:05 PM
Hi

Tested and good work.
Solved.

Thanks

pb1234
24th June, 2012, 09:47 AM
Hi
Where to buy quality 24C02WP?
thanks

Music73
24th June, 2012, 10:12 AM
RS Components I got mine from... But would think Farnell's or maybe even a Maplins store should be able to supply them...

Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2

furnata
24th June, 2012, 10:24 AM
Or you can just buy new 24c02 and protect from write with pin's 7 to 8 - most of cases eeprom hardware defect

cardiagnostic2
14th November, 2012, 01:24 PM
Or you can just buy new 24c02 and protect from write with pin's 7 to 8 - most of cases eeprom hardware defect
Need to cut any wire from immo ?

Music73
15th November, 2012, 11:18 PM
No coz the eprom being write protected prevents the immo writing immo data to it..

Music73

darwins
22nd January, 2013, 07:40 PM
Hello Friends..

I have a 0 281 001 768 which needs immo off because the immo is damaged......

I'm really confused with this one, I made new file using usual suspects from my original file but it does not work..

My confusion is reference the "Write Protect" part... I used new 24C02 and lifted pin 7 and bridged to 8 as seen in another post.. This pin out don't match UPA suggestion however its reported to work :hmmmm2:

Then I read about using 24C02WP eeprom and lifting pin 7 :hmmmm2: If a WP eeprom is used and write protected why would legs need lifting ?

Any roads bottom line...What file works and exactly what needs doing in resepect of eeprom ? :vroam:

The data in my eeprom is changing so lifting 7 to 8 is not stopping this in a normal 24c02 eeprom

I hope some one can help clear this up for me...

Darwins

Its a bad week I can feel it in my water :)

antlio
23rd January, 2013, 05:28 PM
Hi

Tested solution . Pass is in your pm .

regards

darwins
23rd January, 2013, 05:33 PM
Thanks again antlio for another helping hand...

tuareg
19th March, 2013, 04:23 PM
Me too ned 100% solution immo off voyager 2.5 td

0281010139

24c02

javiercj
29th September, 2013, 08:05 AM
Hi

Tested and good work.
Solved.

Thanks

hello circuit

how to make immo off in these car with ecu 0 281 001 768 ?

please

manete
10th September, 2015, 03:56 PM
darwins can you give me the pass too because i have the same problem

fordobd
24th February, 2016, 02:02 PM
Please need Pass ??? Thanks....

Edvardas
18th October, 2018, 12:07 PM
need pass for 0 281 001 708 immo off, or tested file. many thnx

Apsik
15th November, 2018, 08:51 PM
Hi

same issue here.
Tested solution needed.
I have already bought AT24C02C which is write protected.

Thanks in advance