VU Duo Tuner B Problem

[SGTFlipFlop]

Righteo, Got my box, set it up ViX image thought all was working OK, Until I thought I would try the twin tuner out.

Started recorded ITV on tuner A, Perfect all working then when I go to change channel on Tuner B I get 0% SNR on all HD channels but on SD channels I get a signal (About 40% SNR) but very blocky which clears up if I stop the recording on Tuner A, Is there a way just to test each tuner on there own? and does anyone have the same problem as me and know a fix?

Help meeeeeeeeeeeeee

[dell_xps]

Whats yer setup in tuner config m8 ?, have you got tuner setup on loop through ?

[SGTFlipFlop]

Got it sorted, The second feed cable had shorted out, Pulled it back a few cm and it worked perfect

:)

[birdman99]

is loop through the correct setting for tuner b on motorised dish setup duo twin lnb?

[RuberDuck]

no set it to equal to tuner a

[tichmc9]

whats the correct settings for tuner configuration got duo clone but only get 200 services tuner a set to single then simple ?

[dell_xps]

Should find about 1042 or there abouts m8, got it set to Astra ?
Away the bears ;-)