VP44 IDS Procedure programming

[wwa]

Hello,

I search procedure programing for VP44, maybe someone have ?
Thanks in advance.

[nesmark]

Hi,
i think that is possible only in service centre

[3in1san]

Hi
You need IDS ford.

[morito]

and which is Procedure programming ???????

[zoro1]

What do you whant to do?put secon hand pump in car?
there is option in menu ,mast find outcode,then calculate incode and write with IDS in pump/all thi tru obd/
if you hawe a brand new pump with module -only bosch 815 can program pump ecu/psg5 /.The psg5 is OTP.

[wwa]

Car is Ford Transit 2001, and I need only change the ECU from VP44.
I have used ECU from another car. I also have IDS Ford. I want to know if I can add a used ECU to another car. I also have a calculator INCODE-OUTCODE

[joemajdalani]

No need for incode on 2001 model & yes you can use used parts.

[cezarycezary8]

if you have Bosh KTS it's easy and don't need in code

[morito]

kts works ok in this pumps

regards

[ciptel07]

hello, you must to select car- --module programing--security---select PCM--- match new module-select new FIP.

[zoro1]

The ECU mast be from the same car!I mean engine the same and main ECU the same brand and model!You can not put ECM from 1.9L engine to 2.0L engine .

[nabilrifi]

pleas name of cable or refrance used with kts

if you have Bosh KTS it's easy and don't need in code

[zoro1]

Make it your own!Conect K-lines ,CAN lines and power,two cables for power and you are rich with 200 EURO....And bosch poor -200Euro.

[nabilrifi]

can you give pinout pleas

[zoro1]

for PSG 5 ,for OBD 2 see link.
http://www.obdstore.com/wp-content/uploads/2011/09/obd2_cable_pinout.png

[ssilvviu]

hello, you must to select car- --module programing--security---select PCM--- match new module-select new FIP.


IDS V75.01 don't have "security--PCM--match new module--new FIP" menu.
Could you help me in FIP programming? The car has a second hand pump that has to be programmed.

[Music73]

IDS V75.01 don't have "security--PCM--match new module--new FIP" menu.
Could you help me in FIP programming? The car has a second hand pump that has to be programmed.

Try going back to the toolbox and select Body - Security - Pats - then you should see FIP option.. I was doing one today but was using etis with genuine IDS on V81 and thats where i found it

[ssilvviu]

I have tried this, but it keeps saying "turn ignition on", "ensure that ignition is turned on".

[flip]

http://www.digital-kaos.co.uk/forums/f166/ford-injection-pump-programming-ids-304667/#post1781914

Just went through this problem

Then read my next post

[ssilvviu]

It was because bad clone.... huh?

[flip]

It was because bad clone.... huh?

Yep:beheaded:

[flip]

when you do dtc search on pcm do you have no ign on issue and only during programming. There's no diff in com from pcm except the head rerouting the info through the com lines and there for the ids software on pc thinks there is no ign.