need help piccaso bsi problem

[gedas8899]

hello mates, i need help first time i try to do this car and have some problem.
citroen piccaso
2002, 2.0hdi bsi nec
I try to read with digimaster 3 and no succes, get mesage always not find device.
I put again bsi in car, car start, but dash beeping,says abs fault, in km place -------,
conect lexia but lexia dont see bsi, i try to learning but need security code wher i can getet.
thanks

[diga1]

check soldering in nec. there vere pins you had to lift so check if they are down, and maybe those resistors are shorted. for pin you vill have to read bsi file and post on dk and someone vill give you pin but first you have to fix bsi

[gedas8899]

thanks mate i chek and let you know

[PETAR]

100% soldering problem
you can use etl programer for this mcu nec very good tool

[cfull]

Hi friend

post the dump to read security code to be able to enter with lexia...

Regards

[gedas8899]

I try to read with upa but no succes, look all solderings looks ok.
if i get used bsi its posible to program to ecu and wher i can get code its posible from vin.
VF7CHRHYB39159587
what is the best way fix this car.
thanks

[cricstudio]

1 option must: make bsi virgen.extract code from ECU, and recorder with lexia
2 option: put another coded bsi and make immo off for ECU

[gedas8899]

hello guys i chek the resistors near by procesor and i think they broken, can i change with similary its very important put the same. orginal is 221 so i think her is 220ohm
its posible put lower o biger?

[gedas8899]

Thank you everybody for helping problem solved it was overheated 221x4, so i need more practice soldering skills :)

[Digamax]

Thank you everybody for helping problem solved it was overheated 221x4, so i need more practice soldering skills :)
You can by microhooks and make life more easy.

Best regards
Vladimir

[CARPARTS]

where to find those microhooks @ normal price
i paid 25 $ each few years ago

[captain crackers]

Google e-z-hook. Part no. X2015. Arthur.

[CARPARTS]

great ! thanks, cheaper then before !!!

any idea maybe about those contact-springs, 6 in a row to access the back from a nissan for example / oooooo

and not to forget the 2 x 3 BDM contact-springs

ooo
ooo

thx

[captain crackers]

Carparts, PM me about those. Arthur.

[r6eck]

Much easier to solder at these points