corvette 2006 transmission

[lashkar97]

friend i change transmission control module of a corvette 2006 . now its not ready to start its give immo code . i have tech2 so can some body help me how i can program or sync between module and ecu . and which tool i need .
thanks advanced

[buffetw]

where did TCM come from? May need to be reset thru TIS2web or cd if you have it. You may get lucky and only need a security relearn procedure.

[danog]

If the transmission control module (TCM) is replaced, TCM Reprogramming must be performed. Refer to Service Programming System (SPS) (http://gsi.xw.gm.com/newsi/cellHandler.do?cellId=71878&refDoc=1466621&from=sm) .
<A href="http://gsi.xw.gm.com/newsi/showDoc.do?docSyskey=1466621&cellId=135295&pubObjSyskey=4147990&from=sm&pubCellSyskey=715404&deliveryEffectiveDate=Feb+1%2C+2012#N65562">TCM Reprogramming Procedure


If the TCM is reprogrammed, the following procedures must be performed:
Refer to Service Programming System (SPS) (http://gsi.xw.gm.com/newsi/cellHandler.do?cellId=71878&refDoc=1466621&from=sm) .
Ensure the following conditions exist in order to prepare for TCM programming or reprogramming:

***8226; The battery is fully charged.
***8226; The ignition switch is in the RUN position.
***8226; The Techline equipment cable connection at the data link connector***8201;(DLC) is secure.
Program the TCM using the latest software matching the vehicle. Refer to up-to-date Techline equipment user instructions.
If the TCM fails to program, proceed as follows:

***8226; Ensure the TCM connection is good.
***8226; Inspect the Techline equipment for the latest software version.
***8226; Attempt to program the TCM. If the TCM still cannot be programmed properly, replace the TCM

[lashkar97]

friend thanks for help . i have tech2 of china version by this can i perform online if i purchase subcription for 3 day from ACDELCO