Kia Suma Siemens K103735112C TMS28F512A

[adam1w]

Hi`
Can you help me in removing this immo ecu.

Kia Suma 1,5L DOHC K2AC 18 881A Siemens K103735112C S-II TMS28F512A

[adam1w]

Can anyone help me

[itrade]

Can anyone help me

Tomorrow will help you

[odyseus7]

Remove immo box.

[adam1w]

Hi`
odyseus7 your dump does not work.

Please help

[Gery]

send a picture the engine controller . the received content good.

[adam1w]

send a picture the engine controller . the received content good.


Picture ECU

[Gery]

here the solution , observe the description only.I made some already . the program will work so .

[Gery]

The program makes injection ,
the trussing makes spark.

Excuse me the bad language knowledge. :-)

[adam1w]

The program makes injection ,
the trussing makes spark.

Excuse me the bad language knowledge. :-)

Thank you for your response.
Do you save our original dump and make this modification?

[Gery]

ecutool, immokiller and immocleaner give a good program. But if he is needed I can send a content . There are two contents to it. I do not deal with the original one.

[spens]

This solution works 100% pass in your PM

Best regards

[Gery]

here a content

[Gery]

/spens/thank you, I try this then . What I put out onto the forum works.

[adam1w]

Thank you.
Everything works in your dump "Spens".
Thank you for your help, "Spens", "Gery", "odyseus7"

[Dacha]

Hello everyone!I have the same problem with IMMO the Kia Sephia 1.5 DOHC.He asked if it would be the attachment pasword.I thank you in advance to help!

[Dacha]

I tried the instructions given by spen but without success. Before the closure imo when the car starts to cast only one spark plug spark, and then no more sparks. After closure of immo no spark uop***353;te.Da Is it possible that the content of flash is not compatible for my ECU: siemens K103735112A K2AC 18 881 ?

[adam1w]

I tried the instructions given by spen but without success. Before the closure imo when the car starts to cast only one spark plug spark, and then no more sparks. After closure of immo no spark uop***353;te.Da Is it possible that the content of flash is not compatible for my ECU: siemens K103735112A K2AC 18 881 ?

For version K103735112A this dump will not work.

How do you upload your dump is can anyone help

http://www.digital-kaos.co.uk/forums/search.php?searchid=9343539

[gadroulll]

there are 4 or 5 ways to unlock this ecu i do not think that you need help .make a search in the forums

[DSAuto]

Hello guys,

Kia Suma 1,5L DOHC K2AC 18 881A Siemens K103735112C S-II TMS28F512A.

I need to make the ECU virgin or remove the immo.
Thank you in advance!

Dimitri

[PierreTheron]

Hello guys,

Kia Suma 1,5L DOHC K2AC 18 881A Siemens K103735112C S-II TMS28F512A.

I need to make the ECU virgin or remove the immo.
Thank you in advance!

Dimitri


Learn to use your savvy .

You will find d the solution.

\As they say persistance will follow.. That is DK:manutop:

[antlio]

Hi

Tested solution . Pass is in your pm .

regards

[DSAuto]

Learn to use your savvy .

You will find d the solution.

\As they say persistance will follow.. That is DK:manutop:
Hello PierreTheron,

All the files that are not password protected do not work or the radiator fan stays on all the time.
I went trough all of them,
Regards
Dimitri

[DSAuto]

Hello Antlio,

Thank you very much for the solution!
Will test and report on Monday.
Have a nice weekend!
Dimitri

[PierreTheron]

Here your file . Must work correct..






(File removed)

[DSAuto]

Hello guys,

The files from Antlio and PierreTheron are exactly the same.
The car starts and drives OK, radiator fan works perfect.
The only problem is we lost comms with the engine electronics (the immo box K lines are bypassed) and the management light stays ON. Obviously we can not check the faults. If we use set from a working car everything is OK-the light goes OFF and no faults in the system. It seems to me this is not a software from the same type of car, but it works. For me the best way out is to make the ECU virgin and code the immo and the keys.

We disconnected the management light from the ECU and the customer was happy with the car.

Thank you Antlio and PierreTheron.

Dimitri

[PierreTheron]

Hello guys,

The files from Antlio and PierreTheron are exactly the same.
The car starts and drives OK, radiator fan works perfect.
The only problem is we lost comms with the engine electronics (the immo box K lines are bypassed) and the management light stays ON. Obviously we can not check the faults. If we use set from a working car everything is OK-the light goes OFF and no faults in the system. It seems to me this is not a software from the same type of car, but it works. For me the best way out is to make the ECU virgin and code the immo and the keys.

We disconnected the management light from the ECU and the customer was happy with the car.

Thank you Antlio and PierreTheron.

Dimitri

No mate . This is your same software from your car that you posted . Only immobilizer section have been killed.So must work correctly ..
Unless something is damaged inside ecu.

[DSAuto]

No mate . This is your same software from your car that you posted . Only immobilizer section have been killed.So must work correctly ..
Unless something is damaged inside ecu.
Hello Pierre Theron,

If I use the dump from DK (with radiator fan on problem) the car starts perfect and runs OK.With the original software we have comms with Carman and we lost it after dump change. Obviously ECU is not the problem.

I will try to make ECU virgin and then program the keys. In that case I will keep my original software.

Thank you!

Dimitri

[DSAuto]

Hello everyone.
I turns out it is not an easy job to make the ECU virgin or extract the pin code.

Any idea how to read the tms374?
All the connection instructions do not apply to my ECU.
The crystal is connected on different pins.

[tonijet]

Friend you can inform me password, thanks

[PierreTheron]

Friend you can inform me password, thanks
Post your file and someone can help ..

[rog3rio]

hi
i have same ecu any help
KIA 1.5LDOHC K2AC 18881A-SIEMENS K103735112C
thanks

[PierreTheron]

hi
i have same ecu any help
KIA 1.5LDOHC K2AC 18881A-SIEMENS K103735112C
thanks

Here your file Off.

Please report outcome ...


File removed

[jarfm]

This solution works 100% pass in your PM

Best regards

Hi, can I have password? THX

[spens]

Hello!
I forget pass for archive,but here is new!!!

[johnie-9]

Hi! Can someone give me the pass for spens's file? please it's urgent!

[transbg]

Hi! Can someone give me the pass for spens's file? please it's urgent! Gracias

[veselinchev]

Hi Spens i need pass for Kia Schuma, please!!