AUDI A 4 ECU IMMO RE-SYNCH

[makura]

Hallo
Can some one please help re-synch these two dumps for a AUDI A4 2.4l QUATTRO 1999 model,i just reprogrammed the keys and now my ad100 says ecu-immo not in synch and a 32 min security time remaining,and its been saying that the whole day,left the car on for more than three hours connected batt charger but nothing changes,immo light now goes off and the car starts for 3sec and shuts down.no fault codes in the immo.
:bandit:

[makura]

Its a Friday,must be getting high.i forgot to attach the files,any way here they are

[keygargoil]

2 keys stored and pin is 01071

[makura]

2 keys stored and pin is 01071
yes thats right,i stored the two keys,now i want the ecu and immo to be married.

[smokey08]

With VCDS go into 01-engine, 10-adaption, channel 0, save value 00. This should resync it.

[makura]

With VCDS go into 01-engine, 10-adaption, channel 0, save value 00. This should resync it.
Well i erased the eeprom for my vag 409.1 cable,now it just reads as com port,cant find the eeprom data for this cable,i have ordered another one but its taking forever to get here,thanks to my customs agency.

[makura]

can some one please make the ecu dump virgin ?

[mlulic]

VCDS
17 instrument cluster
10 adaption
0 chanel save 0

immo 2 system

[makura]

VCDS
17 instrument cluster
10 adaption
0 chanel save 0

immo 2 system
I dont have VCDS,i use AD100 for ecu adaptation but this one keeps saying security 35 min remaining,it never counts down the 35min even if you leave the car on for 1hr,so i need a virgin dump for the ecu to start adaptation from a clean dump with no waiting time.

[makura]

read fault codes and i am getting 18048,can some one please repair my dump or post a virgin dump.
Thanks