Techstream 7.00.020 programming ecm

[joshplianfield]

hi there,

I recently got techstream 7.00.020 working on my pc and need to program an ecm, does anyone know if I get a 2 day license from toyotatechinfo if I can use it to program?

if not does anyone have the calibration dvd? or know where i can download my file?

[thumthums]

techstream reprogramming you need :PM sent

[joshplianfield]

thanks I will try today and report back

[seba6772]

Hi where I can get techstream reprogramming??

[joshplianfield]

i tried to program with usb link which is j2534 compatible and a choice in the drop down menu.

however when it say "turn key off and hit next" it then says "failed to locate device"

I tried v7 and v5, I ran calibration update manager

what connector are you using to flash ecms? a link would be great.

I got one of these coming

MINI VCI FOR TOYOTA TIS Techstream V5.00.028 | eBay (http://www.ebay.com/itm/MINI-VCI-TOYOTA-TIS-Techstream-V5-00-028-/170779336853?pt=Motors_Automotive_Tools&vxp=mtr&hash=item27c33de095)

[joshplianfield]

anyone program?

[eddie8]

i tried to program with usb link which is j2534 compatible and a choice in the drop down menu.

however when it say "turn key off and hit next" it then says "failed to locate device"

I tried v7 and v5, I ran calibration update manager

what connector are you using to flash ecms? a link would be great.

I got one of these coming

MINI VCI FOR TOYOTA TIS Techstream V5.00.028 | eBay (http://www.ebay.com/itm/MINI-VCI-TOYOTA-TIS-Techstream-V5-00-028-/170779336853?pt=Motors_Automotive_Tools&vxp=mtr&hash=item27c33de095)

Hi Josh. I use my cardaq-m but i havent been able to try it with version 7 yet.
I have the usb link as well. What adapter are you using? Is it the same one as the Isuzu?

[joshplianfield]

Hi Josh. I use my cardaq-m but i havent been able to try it with version 7 yet.
I have the usb link as well. What adapter are you using? Is it the same one as the Isuzu?

I use the nexiq usb link w/448013 (the same one I use for Isuzu and Hino)

I can do all testing, codes and communicate with all modules.

[eddie8]

I use the nexiq usb link w/448013 (the same one I use for Isuzu and Hino)

I can do all testing, codes and communicate with all modules.

I got that one. I'll have to try it.
Thanks

[joshplianfield]

I got my new MVCI toyota adapter today and it goes further than the nexiq did, it gets to the point where is says "turn off 10 seconds" then it says "turn key on, open hood and hit next" then it says "unable to enter programming mode", is there something can do before I suck it up and get the dealer to flash the ECM?

The new MVCI adapter works fine for pulling codes and scan data.

[magdyman]

Hello, all
i have MVCI Toyota and need to make reprogramming for
Hiace ( 2kd-ftv Diesel Engine ).
i have get a DVD for reprog. but i found it for north America vehicles only don't contains Hiace.
now i am asking for calibration file for this ecu or a right DVD please .
Best Regards

[NightDragon]

Hello, all
i have MVCI Toyota and need to make reprogramming for
Hiace ( 2kd-ftv Diesel Engine ).
i have get a DVD for reprog. but i found it for north America vehicles only don't contains Hiace.
now i am asking for calibration file for this ecu or a right DVD please .
Best Regards
Can you share the calibration for North American DVD you have?

[randomwalk101]

anyone has a download link for Techstream 7?

[AEN]

Look here: http://www.digital-kaos.co.uk/forums/f152/toyota-techstream-7-00-020-vim-select-does-not-display-devices-261543/

[i_shot_the_sheriff]

Hey mates,

Heyyyy where are you getting the "files" for the ecu calibration? I'm using the 7 Techstream with my avdi but i dn\on't have any files to update :P