OPEL KEY DATA PLEASE

[makura]

Hi Guys
CAn some help me with the key data from this dump.

[lupu_sandu]

Read again m8. Bad dump.

[makura]

here read again (64x16)

[igorr]

Hi Guys
CAn some help me with the key data from this dump.
for this opel(frontera) you must use id48 and transponder must be precoded
Pin Code: 1446

[makura]

for this opel(frontera) you must use id48 and transponder must be precoded
Pin Code: 1446
So which dump is well read m8?my zedbull is failing to auto id the file.

[teuton]

So which dump is well read m8?my zedbull is failing to auto id the file.

The second dump reads o.k.

[makura]

Can zedbull do this car,and which module do you select if you were to select a module manualy?

[richard27]

71. module ok

[igorr]

Can zedbull do this car,and which module do you select if you were to select a module manualy?
orginal zedbull can do this car

[makura]

orginal zedbull can do this car
Cant wait for my TAGTOOL,this zedbull clone is letting me down,no module 71,it only has up to module 55.
Any one have the pinout for this immo box?

[richard27]

Pin Kod: 1446 If you want the software but I can do for you that the front of

[makura]

Pin Kod: 1446 If you want the software but I can do for you that the front of
Software would be great mate.

[vanos batam]

Hi Guys
CAn some help me with the key data from this dump.


T5 FF 81 2C 03 0F 3A C0 58

[keygargoil]

Memory device - eeprom 93c46 - 8 pin SMD.File size - 128 bytes
Used in - Opel Frontera,Isuzu Trooper,Rodeo
Transponder to write - Megamos Crypto - Silca T6 - JMA TP08
Transponder is ready programmed to start the vehicle

[makura]

frantera,thats right

[richard27]

hi How did you need this tool is that it uses 48 types of 13 does not

[richard27]

give some information about it to me

[makura]

T5 FF 81 2C 03 0F 3A C0 58
No luck,ID 48 cant be written on a T5,as soon as i select ID48 the T5 button is greyed out.(zedbull clone)

[FXless]

Cant wait for my TAGTOOL,this zedbull clone is letting me down,no module 71,it only has up to module 55.
Any one have the pinout for this immo box?

tagkeytool wont do ID48 or ID40 for opel m8 :(

[makura]

tagkeytool wont do ID48 or ID40 for opel m8 :(
How about TANGO?

[FXless]

Standard Tango will not cover it m8. you will have to buy opel software to make ID48 transponder