PDA

View Full Version : what is the best clone???



dashboardkiller
13th February, 2012, 07:59 PM
Hi at all!

I am looking for a good clone that can really EDC15 and 16 without problems.

could you give me your opinion and where to buy it.

I saw a lot of different sellers with the "same" product, different prices and I don?t know what to do.

thank you very much

regards

dashboardkiller

JaboJG
13th February, 2012, 08:07 PM
If you buy an MPPS v12 european clone, a Galletto 1260 and a chinese BDM 100 you'll be sorted.

dashboardkiller
13th February, 2012, 11:13 PM
If you buy an MPPS v12 european clone, a Galletto 1260 and a chinese BDM 100 you'll be sorted.


thank you for the post!

can you tell me some online shops that are good for these tools?

thanks

regards

dashboardkiller
13th February, 2012, 11:14 PM
what about edc17 ?

can any clone do them?

regards

JaboJG
13th February, 2012, 11:33 PM
I bought mine from eBay at good prices. I don't know about EDC17 though.


thank you for the post!

can you tell me some online shops that are good for these tools?

thanks

regards

wiseman
13th February, 2012, 11:59 PM
MPPS supports Edc17

dashboardkiller
14th February, 2012, 01:35 AM
MPPS supports Edc17


tested???

obd?

what about tricore??

thanks!

regards

powertdi
14th February, 2012, 07:00 AM
MPPS supported EDC17 w\o antituning protection.( tested)
But best clone for all in one unit its Galeto2( Fgetech). Support all protocols edc15,16,17 ,also BDM, Tricore boot ,marines .truck and bikes... So its nice to have it like main tool.

moky
16th February, 2012, 07:14 AM
mpps / galetto 2 / and powergate are fine

ipejasinovic
16th February, 2012, 10:39 AM
Galletto v2 is now best clone on market with OBD, BDM and Tricore Boot support.

moky
16th February, 2012, 12:31 PM
of course but production is stopped no?

i have one and work fine on all protocole and on last processor in tricore boot but future updates are compromise...

coolis
16th February, 2012, 05:38 PM
Galletto v2 is now best clone on market with OBD, BDM and Tricore Boot support.

can you sent link where i can buy galletto v2 clone, tricore support.. or some other clone

warrior888
21st February, 2012, 12:29 AM
Interested in Gal v2 clone, any seller please PM me

z786
21st February, 2012, 01:22 AM
fgtech clone with updates any1, tell me plz

faiscamix
21st February, 2012, 10:01 PM
of course but production is stopped no?

i have one and work fine on all protocole and on last processor in tricore boot but future updates are compromise...


Not true i think

looly
21st February, 2012, 11:15 PM
So..where can one buy a galletto 2 clone?

badfree
22nd February, 2012, 12:40 AM
Hello looly should you want to buy a new galletto2 comes in contact with me because I am a friend who sells them.
excuse my bad english

z786
22nd February, 2012, 01:15 AM
whats the price

ipejasinovic
2nd March, 2012, 08:54 PM
I know that good clones are now around 1300e. They have, alongside OBD cable, a HQ boot cable and BDM probe to use CMD BDM probes with Galletto.

kenancatli
12th June, 2012, 02:51 AM
hello
where I can buy new galletto V2 clone?sent in PM
best regards

mbtun
12th June, 2012, 07:20 AM
I know that good clones are now around 1300e. They have, alongside OBD cable, a HQ boot cable and BDM probe to use CMD BDM probes with Galletto.

european clones are now at 999euro and dropping price FAST!!!

Marmes
13th June, 2012, 02:25 AM
powergate(original, modified)

tuningschool
13th June, 2012, 02:31 PM
european clones are now at 999euro and dropping price FAST!!!

yes.
Good QUALITY EUROPEAN CLONE at 1000 euro shipped.

but i dont need because i have original tool

willobd
12th July, 2012, 04:52 AM
Hi at all!

I am looking for a good clone that can really EDC15 and 16 without problems.

could you give me your opinion and where to buy it.

I saw a lot of different sellers with the "same" product, different prices and I don?t know what to do.

thank you very much

regards

dashboardkiller

the best tool is the FGTech Galletto2....
:celticparty:

willobd
12th July, 2012, 04:58 AM
MPPS supports Edc17

not good at....

willobd
12th July, 2012, 05:00 AM
MPPS supported EDC17 w\o antituning protection.( tested)
But best clone for all in one unit its Galeto2( Fgetech). Support all protocols edc15,16,17 ,also BDM, Tricore boot ,marines .truck and bikes... So its nice to have it like main tool.

no.... the clone FGTech BDM function still can't use now....
we're contact the factory to solve this problem.
but other functions are good.
and only 245euro

atd
12th July, 2012, 11:44 PM
Be careful, the cheapest clones are the clones of the clone...

autodiagnostic
20th July, 2012, 10:58 AM
MPPS supported EDC17 w\o antituning protection.( tested)
But best clone for all in one unit its Galeto2( Fgetech). Support all protocols edc15,16,17 ,also BDM, Tricore boot ,marines .truck and bikes... So its nice to have it like main tool.

I don't agree with you more!

autodiagnostic
20th July, 2012, 10:59 AM
Be careful, the cheapest clones are the clones of the clone...

It depends which tool you buy, some clone tools are reliable, but some new-born tools are not reliable, that is true!

autodiagnostic
20th July, 2012, 11:02 AM
So..where can one buy a galletto 2 clone?

is famous, besides amazon, ebay.