PDA

View Full Version : lexus 4c to tpx1 trasnponder clone help


blacklisted
13th February, 2012, 08:17 PM
ok here goes

i have zed bull clone ibeen using it for key cloning mostlt t5 or pcf

but today ui try 4c lexus year 2000 to tpx1 and wont do it

i tryed don know why to convert tris to tpx1 using paul guide that dont work

does zed bull clone clone to tpx1?

shall i just copy to EH1 head?

is there anyway to get a 3 botton remote key so can get doors to open close.
bram380
14th February, 2012, 12:06 AM
tpx1 no.
eh1 yes.
pianoman58
14th February, 2012, 01:20 AM
I did something similar to this,
Guy came with 2003 ford KA with electronic head key which read as 4C,but i didn't have any 4c glass so i put in zed-bull and copied onto TPX1 as it said. when i read it the data was identical as the eh1, but the key wouldn't start the car.
Please could some explain in simple terms why this doesn't work the immo
parapilot
16th February, 2012, 02:51 PM
TPX1 does not have enough memory for some systems, mainly some KA systems. So it will not work on everything. EH2 should work.
keygargoil
16th February, 2012, 03:08 PM
TPX1 does not have enough memory for some systems, mainly some KA systems. So it will not work on everything. EH2 should work.

some tpx1 dont have a strong rf field i have done many on tpx1 and in som,e cases i had to hold it up to the aerial for it to work
igorr
16th February, 2012, 03:13 PM
ok here goes

i have zed bull clone ibeen using it for key cloning mostlt t5 or pcf

but today ui try 4c lexus year 2000 to tpx1.
with clone it is best to manually write on TPX1
read orginal key
then key data manually wrote on TPX1
blacklisted
16th February, 2012, 09:42 PM
can you give example as i try manual and the clone give transponder error

zed bull 5.08
tokens 500
no login required

thats my clone but no work to tpx1

can ant 1 give example or manual write
keygargoil
17th February, 2012, 01:05 AM
with clone it is best to manually write on TPX1
read orginal key
then key data manually wrote on TPX1

isnt it mad i noticed that aswell you need to read the original chip write the data down i8n tiris or hex and manually select produce 4c data
blacklisted
22nd February, 2012, 03:40 PM
tpx1 no.
eh1 yes.


@ bram380 or others

you say no because clone cannot write to tpx1 or other reason