PDA

View Full Version : Vu+ Duo Clone *3.1.1 Kernel Update*



digicon
15th February, 2012, 02:23 PM
Vu+ Duo Clone *3.1.1 Kernel Update*

As the title has been released today and is fully working on new Images using Kernel 3.1.1 and latest drivers

Tested myself Currently Running Blackhole 1.7.2 Media Tree

I have enclosed both the software and Readme file, Please read before you do the update.

Thanks to the Guys at Ferrari Forum

potrobber
15th February, 2012, 02:50 PM
hi digi

is there any images out there we should not use on clone box after this update?

thanks in advance

digicon
15th February, 2012, 02:55 PM
hi digi

is there any images out there we should not use on clone box after this update?

thanks in advance


No you can use any official 3.1.1 kernel image you like, I have just tried all the latest blackhole images one after the other 1.7.0,1.7.1 and now running 1.7.2

All running as should be, No problems reported.

delly007
16th February, 2012, 01:33 AM
where is the aesencode.bin file all i have is duo scret chip120215.bin

digicon
16th February, 2012, 02:03 AM
all the files needed are inside the folder mate

delly007
16th February, 2012, 02:07 AM
i cant fine it and i use the file scret now the box is stuck on starting

digicon
16th February, 2012, 02:12 AM
the actual program you use is called 'secupd111230' and the bin file is called 'aesencode.bin' and both those files as well as the run.dll's are inside the folder i upped with the official guide on how to upgrade.

delly007 where have you got this 'scret chip120215.bin' from its not even in that folder, Looks like you flashed it with the wrong program

delly007
16th February, 2012, 02:22 AM
ur file cannot open file it does not appear to be a valid archive
got the other file from ferrari site

digicon
16th February, 2012, 02:45 AM
ur file cannot open file it does not appear to be a valid archive
got the other file from ferrari site


Now i understand what you have done just been to the ferrari forum and the file you mentioned earlier this one 'scret chip120215.bin' is for the SOLO update and not the DUO.

mate you just flashed your Duo with the Solo update

delly007
16th February, 2012, 02:59 AM
~~~~ed is there any thing i can doto fix it
did u fix ur upload

delly007
16th February, 2012, 03:05 AM
Hi
it is for VU+ Duo as it clearly states in title sorry for any misunderstanding.
thats what he said lol

trance
16th February, 2012, 03:23 AM
Vu+ Duo Clone *3.1.1 Kernel Update*

As the title has been released today and is fully working on new Images using Kernel 3.1.1 and latest drivers

Tested myself Currently Running Blackhole 1.7.2 Media Tree

I have enclosed both the software and Readme file, Please read before you do the update.

Thanks to the Guys at Ferrari Forum
This seems to be a very good devolopment indeed, for the clones scene.
Hopefully this wont mess our duo up/somehow[being on the same kernal as the latest original box]

redondo5
16th February, 2012, 03:48 PM
I thought vu instroduced driver security measures recently, have these now been bypassed?

digicon
16th February, 2012, 03:51 PM
I thought vu instroduced driver security measures recently, have these now been bypassed?

Bypassed for now but from my understanding that they could introduce another security check at anytime, I would imagine it will be pretty soon seeing as this works

delly007
16th February, 2012, 05:07 PM
Got it sorted I download ur file with my Htc flyer as it wouldn't open on my w7 64bit
So I copy it to pc and low and behold all files there thanks for the help
Now running blackhole 1.72

sh500
16th February, 2012, 05:20 PM
Anyone tried the latest VIX image with this update? Any problems with it on the clone box?

digicon
17th February, 2012, 02:53 AM
Vu+ Duo Clone *3.1.1 Kernel Update* Revision 3

Just an Update Ferrari have in the last 2 days released 2 new versions of this update the one i have posted here is the latest Revision 3, The only difference is this one will let you go back to older images if you prefer, There is nothing wrong with the other files so no need to be alarmed that is the only change with this loader

Thanks

garry002
17th February, 2012, 04:52 AM
it must be done before or after the flashing image? once or every time of flash new image?

digicon
17th February, 2012, 11:00 AM
it must be done before or after the flashing image? once or every time of flash new image?

Just the once before you upgrade the image once done that's it.

colin445
17th February, 2012, 01:23 PM
I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.

potrobber
17th February, 2012, 01:35 PM
I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.


is this a clone or genuine unit?

first thing you need to do is download the image you want to go with and put it on a clean usb stick

mdt
18th February, 2012, 01:45 PM
I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.


firstly you should say hello in the introductions thread then update your signature and profile with your system(dish size,fixed or motorised) and state if your box is a original or clone. give as much info as possible... help us to help you!!, regards mdt

garry002
18th February, 2012, 07:35 PM
I have a problem with the duo clone. He does not running, the display is written "starting" and then to "vu+ duo" and starting again. What can I do?

dell_xps
18th February, 2012, 07:59 PM
You'll have to reinstall the image m8, update the kernal first then install the latest image.
Look for Digicons post about clone kernal ok.

garry002
18th February, 2012, 08:11 PM
what is the "image m8"?

RuberDuck
18th February, 2012, 08:17 PM
You'll have to reinstall the image m8, update the kernal first then install the latest clone image.
Look for Digicons post about clone kernal and clone firmware, do not use official firmware from Vix etc. use modified Vix etc firmware or you will brick your clone ok.


i'm sorry mate but thats wrong. there are no "modified" images as there are no so called clone bombs. you have to patch the receiver it self so that it can run kernel 3.1.1 images.

dell_xps
18th February, 2012, 10:43 PM
I stand corrected RD !

alexenergy
1st April, 2012, 10:44 AM
Hi, i try to update a MAX+Solo (Vu+solo clone) but 1? step update don't start...

dell_xps
1st April, 2012, 10:49 AM
Does it have a white v2 sticker on top of it ?

benny/9
16th April, 2012, 02:32 PM
here is the duo_scret 311 kernal update file
along with the loader panel to send it to your box
dont forget to use the rs232 board in line with your
null modem cable when loading this file

digicon
16th April, 2012, 02:53 PM
here is the duo_scret 311 kernal update file
along with the loader panel to send it to your box
dont forget to use the rs232 board in line with your
null modem cable when loading this file

A search is all that's required


Kernel Update (http://www.digital-kaos.co.uk/forums/f193/vu-duo-clone-3-1-1-kernel-update-255713/index2.html#post1455875)

gsm83
15th June, 2012, 10:53 PM
How I can unbrick Max+ solo clone?
Thank you!

geba
8th July, 2012, 05:56 PM
I did it, bricked my vu+ duo clone by using the solo bootloader. Darn... :banghead:

Is there already a way to fix this?

benny/9
8th July, 2012, 06:33 PM
I did it, bricked my vu+ duo clone by using the solo bootloader. Darn... :banghead:

Is there already a way to fix this?
********************************
this is posted on the ferrari forum to fix your box
take a look at the pfd attachment then take a look
and ask on that forum

geba
8th July, 2012, 06:44 PM
********************************
this is posted on the ferrari forum to fix your box
take a look at the pfd attachment then take a look
and ask on that forum

Gonna try that. Thank you!

geoninja
12th July, 2012, 04:44 PM
thank you lot:thrasher:

xxxpitbullxxx
28th July, 2012, 02:11 PM
Good morning to all I ask for help for my vu + clone had only 166 image I discovered later that it was a clone, but now I had purchased I updated the kernel to 3.1.1 then 1.7.6 then also the image but no 1.7 .5 1.7.4 1.7.3 1.7.2 and still nothing does not work now even with the 1.6.6 what should I do? please help thanks
1 -installing the soloboot.bin with UpdateAllFlash.exe
2 -installing the UPFLASH120227.bin with renewflash.exe
3 -Erase the memory with ERASE126.exe
4 -installing the Secret SOLO-120229.bin with secupd111230.exe
5 -installing the cfe_solo_2.0 with a usb pen drive
6 -installing a image XX with the usb pen drive
but nothing help me please

DOUGALMCD
28th July, 2012, 03:05 PM
If it's solo post in the solo section and welcome to Digital Kaos.

shindiglad
1st August, 2012, 09:31 PM
please let me download this :(

pepela
15th August, 2012, 06:29 AM
when i try tot do "VU DUO secret chip update 120229" with null modem kabel en board, receiver starts, and display shows "Starting"....
afther 5 min, still the same

i just instaled BH 1.7.3 whitour problems

do i still need update?

regards,

septicsmurf
15th August, 2012, 06:44 AM
If your vu+ duo clone has a v2 sticker on the back it's already been done. Does it have this sticker?

pepela
15th August, 2012, 07:41 AM
thanks for reply

no it has no v2.0 sticker

i manage to update on other pc with integrated com port.
with usb2com adapter not worked on my (this) pc

thanks

regards

DOUGALMCD
15th August, 2012, 08:48 AM
As digicon gives you ic update on post 1 you seem to have done this but he also gives you bootloader on post 31 which it seems you have not done. So if you have clone v1.......
1 ic update via board and null modem cable
2 format usb unzip bootloader [make sure you have correct one for your box] put on usb then flash this takes seconds.
3 format usb again load image to usb [Again correct one for your box if your not sure ask] then flash do not pull out usb until done once finished reboot.

If you read the whole thread you may get there. Any info is for help only fiddle about at your own risk.

satmandanuk
31st August, 2012, 12:45 PM
Vu+ Duo Clone *3.1.1 Kernel Update*

As the title has been released today and is fully working on new Images using Kernel 3.1.1 and latest drivers

Tested myself Currently Running Blackhole 1.7.2 Media Tree

I have enclosed both the software and Readme file, Please read before you do the update.

Thanks to the Guys at Ferrari Forum

Hi recently bought a clone vu+ duo box and its currently running Blackhole 1.7.2 Media Tree. is it safe to assume that this is using the new kernel update . I was looking to flash BH 1.7.5 any would be help gratefully appreciated
Dan


Kind Regards

Dan

DOUGALMCD
31st August, 2012, 03:27 PM
This has 3.1.1 kernel.
Good idea to make a full back up before you flash.

koblitz
13th November, 2017, 04:17 PM
Hi, I'm being refused a download, somebody please tell, do I have to post on this thread to get permission to download the How_to_update_Security_IC_for_Vu_Duo.zip
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=103415&d=1329312187)

koblitz
14th November, 2017, 06:59 PM
Hi, I'm being refused a download, somebody please tell, do I have to post on this thread to get permission to download the How_to_update_Security_IC_for_Vu_Duo.zip
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=103415&d=1329312187)
All is fine now, thanks, I have been 'given' permission. :)

toysoft
27th December, 2017, 06:51 PM
For Ferrari boxes, you can replace the old v3.x or v1/2.x by the new "VU J Board" and your Solo/Duo Ferrari clone will be capable of running Original images also with newer kernel.

Read more here,

http://www.digital-kaos.co.uk/forums/showthread.php/634392-VU-Boxes-Announcement-the-VU-J-Chip-by-Japhar-!

TS