PDA

View Full Version : vw caddy


cfgebel
16th February, 2012, 11:20 PM
hi dk members

vw caddy 1.9 tdi ecu edc16u34 03G906021HS

need fap off for this file

thanks
mislav88
16th February, 2012, 11:33 PM
BLS engine? ecusafe should work fine with this, just reset ash counter with VAS.
cfgebel
17th February, 2012, 10:31 PM
no one can help me ?
chiptunerkft
18th February, 2012, 10:43 AM
Hi, here is your file. PM for pass.

Regards.
cfgebel
19th February, 2012, 03:46 PM
the pass please

thanks
cfgebel
19th February, 2012, 07:17 PM
please help ......
benzerrouki
19th February, 2012, 07:21 PM
hi mate join me on skype
cfgebel
22nd February, 2012, 11:19 AM
please help !!!!!!!!!!!
cfgebel
23rd February, 2012, 10:11 PM
... thanks for all problem resolved ...
slonenok1980
25th February, 2012, 08:36 PM
1bit end all is ok
yas200979
26th February, 2012, 08:03 AM
1bit end all is ok
1bit not correkt dpf_off this auto))).:roflmao:
ahadi
17th March, 2012, 02:47 PM
Hi, here is your file. PM for pass.

Regards.

may i get the pass for this file , and how to reset the ash countre i have vas5054a behave like original edic interface .

Thankx in advance
doctordiag
24th April, 2013, 11:22 AM
vw caddy 1.9 tdi ecu edc16u34 03G906021HS 0281013681
dump read by bdm 100
i work with ecusafe all is good
engine no dtc but in dash lamp fap on
dllaves
29th October, 2015, 06:57 PM
Hi, I'm David, first of all greetings to all members, forgive my English, I have a problem with this particular ecu is that the flash is erased after running out of battery while in the middle of a programming by OBD.
The question is not totally erased everything.
For BDM if I can read and write but by mistake tambien didn't backup my question is whether this original file would serve me to schedule by using ktag master bdm Alientech. many thanks in advance