eurvox max v scans but not getting any chanels

[digitech2]

hi all,

i have eurovox max v 2008 black box. one of my friend has given me as faulty. trying to fix it out. but when i flashed it tried to scan but didn't get any chanels after finishing scan. what could be the reason. can any body explain pls. many thanks

[shady77]

first and it may seem a stupid question, but you have got a live cable feed?

[digitech2]

yes we have live cable feed. another box working. tried the same firmware on two different box one working but this one not getting any chanels. pls help

[Fergal]

Backup the channel data of the working one and put it on the other one and see if you get any picture try fta channels first

[digitech2]

backed up the working box & upload the back to faulty one. still says no signals.

[Fergal]

press info twice and see what the signal quality is if its 8% put the 8% au software fix on it

[digitech2]

checked with info button twice. level is 99% & quality is 99%. next?

[fuzion]

maybe u need to update the firmware like me!

[digitech2]

how did you update firmware fuzion?

[HiTeck]

checked with info button twice. level is 99% & quality is 99%. next?

Your signal strength is way too high, either high or low can cause problems when scanning.

Press Menu, config, system info and type back what's in there.

[digitech2]

hello hiteck,

when i pressed menu-config-system information got the following details.
model: DVB-XC Box vtda
s/w ver: 1.0stc 4 Apr 8 2008
h/w ver: 2.01k5
boot strap v001
s/f build: kuro

[HiTeck]

Can you tell me when you go into installation, does it have an option to Deep scan?

Edit: I presume the s/w ver: IS= 1.0st4 Apr 18 2008 and not s/w ver: 1.0stc 4 Apr 8 2008 as you originally posted?

[digitech2]

when i press user installation it says fast installation underneath it says advance installation. if press back on that page it's all four options like: update chanels, manual scan, power scan.

the s/w version as you said.

[HiTeck]

As above please read carefully, when you Press-- Menu--then pull right to Installation the box that loads below does it give you an option to DEEP SCAN.

http://i429.photobucket.com/albums/qq13/HiTeck1979/installation.png

[digitech2]

no it's only gives fast installation option

[HiTeck]

I dont think the flash was successful although that is not the issue with regards to picking up TP's.

First of all delete the UFL loader from your PC you used previous then download and flash with this >> Digital Kaos - Downloads - UK Max V Autosort Fix 051208 (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/uk-max-v-autosort-fix-051208-457/)

Factory default then powerscan.

[digitech2]

deleted and trying to upload the new firmware that you provided

[digitech2]

flashed the new firmware. trying to deep scan. tp has gone over 200 but found no tp on the list. what next?

[digitech2]

hiteck, what to do now. still no chanels? help pls

[HiTeck]

Have to get off for today, if it fails factory default then do the same on another symbol rate, you didn't state your location so its hard to say, try 6887 6952 or 6875 as a last resort.

Make sure at the back of the box that your cable feed is plugged into the RF IN and not the ANT.

http://i429.photobucket.com/albums/qq13/HiTeck1979/Fullpowerscanboxesforeurovox.png

Goodnight.

[digitech2]

6952 my area. i have already setup in factory default.

[HiTeck]

Whats the other box your using? have you tried the faulty box in it's place? I dont mean downstairs or in another room in the house but actually replacing the box that's working with the faulty box and scanning on the exact feed.

[digitech2]

the other box working in the same place. i tried the new firmware which you have proved is working on the other box. but don't on this one. not really sure whats wrong. could be the tuner. any idea?

[HiTeck]

If your working box is EV max V and the faulty box is a EV max V are tried on the same feed 1 works the other doesn't then I would say it is faulty.

[digitech2]

yes eurovox max v. same as this one. black box.

[HiTeck]

Look up post edited, Off for now goodnight :)

[alsstuff]

How do you backup the chanel data and restore to a another box please. I have no chanels and what I can see no transponder.