Code for Infinity w079 (Mitsubishi Eclipse)

[kalosbg]

Hello,
i'm looking for code for Infinity W079 from Mitsubishi Eclipse.

MR225577
RZ-5U65CWYM-1 34W0080
Serial NO: 7326A410

[erickuuls]

READ EEPROM AND POST YOUR DUMP HERE

[kalosbg]

I try but cant read with my programmer.
The eeprom is:
LC46
643

I try with: 93LC46(8bit), 93LC46A(8bit),93LC46(16bit), HT93LC46(8bit) and HT93LC46(16bit)
Another ideas?

[admacode]

may be eeprom rotated.

[Starling_vit]

perhaps there are memory is rotated. check the power-supply on a chip (in the normal location of +5 to 8 pin, the ground 5 pin, in the rotated +5V - 2, ground on 7 pin)
chip 93lc46 16bit.

[Argento7]

perhaps there are memory is rotated. check the power-supply on a chip (in the normal location of +5 to 8 pin, the ground 5 pin, in the rotated +5V - 2, ground on 7 pin)
chip 93lc46 16bit.
Or try to read outside of the mainboard.

[kalosbg]

"Successfully" read eeprom and save in bin file, but i make mistake and erase the eeprom. When i try to write bin file on it there is error with verifying. Readed file is incorrect.
After that i successfully write and reread with another configuration of programmer.
Now i'm looking for correct bin for this device. MCU is D17010GF638.

When i write my incorrect file i succsessfuly input the lock code but volume control is't work some ideas? :)

[Argento7]

"Successfully" read eeprom and save in bin file, but i make mistake and erase the eeprom. When i try to write bin file on it there is error with verifying. Readed file is incorrect.
After that i successfully write and reread with another configuration of programmer.
Now i'm looking for correct bin for this device. MCU is D17010GF638.

When i write my incorrect file i succsessfuly input the lock code but volume control is't work some ideas? :)
Try my dump and report! good luck

[kalosbg]

Argento7 (http://www.digital-kaos.co.uk/forums/members/72569-argento7/) did you know what is: "0C 00" from you bin?
I will try this after an hour :)
Thanks i think this will work :)

[Argento7]

Argento7 (http://www.digital-kaos.co.uk/forums/members/72569-argento7/) did you know what is: "0C 00" from you bin?
I will try this after an hour :)
Thanks i think this will work :)
This is counter. If you dont like wait, please try to write 00 30 instead 0C 00... sorry, I dont remember if 00 30 or 30 00 reset counter... Edit: 00 30 is no-code!

[kalosbg]

I try it and its workings! Thank you!
But i didnt unterstand counter for what?
Now unit is working but there is no amp. inside :) (i didn't know) Now i'm lookng for diagram to convert it to device with internal amp :)

[kalosbg]

Can somebody tell me what is amp ICs? Thay must be in 18pin socket (onboard numbers: IC570 and IC370)

[Argento7]

Can somebody tell me what is amp ICs? Thay must be in 18pin socket (onboard numbers: IC570 and IC370)
I think this unit needs an external original amplifier. Infinity system may require an amp to power it. Look under passenger seat!
- Infinity head unit (MR225577)
- Infinity amp (MR158402)
- 2 Infinity dash speakers (MR751693)
- 2 Infinity door speakers (MB954761)
- 2 Infinity rear speakers (MB954762)

[kalosbg]

Yes i agree but i think that i can upgrade to unit with internal amp :) there is free space for amp ICs in 18pin dip
i know that
-18 and 11 pin is +
-17,15 and 14,12 is spreakers outputs
all pins are in one line like STK4122

[Argento7]

Yes i agree but i think that i can upgrade to unit with internal amp :) there is free space for amp ICs in 18pin dip
i know that
-18 and 11 pin is +
-17,15 and 14,12 is spreakers outputs
all pins are in one line like STK4122
Maybe 2X LA4708... like in other mitsubishi radios...
la4708n datasheet pdf, la4708n datasheets pdf, la4708n, la4708n.pdf, la4708n pdf, datasheet4u.net (http://www.datasheet4u.net/share_search.php?sWord=la4708n)

[kalosbg]

i will try to aseble it and post result here :)
and finaly what is this counter in eeprom? What did it count?

[Argento7]

i will try to aseble it and post result here :)
and finaly what is this counter in eeprom? What did it count?
counts how many times you make a mistake while entering a code. after a certain number of errors the radio is locked and need service (our work @ dump). Anti-theft system

[kalosbg]

Thanks again :)
Today i asembly some parts but didn't found another and tomorrow i will finish and post result :)

[kalosbg]

Hello again,
yesterday i finish this unit and now we have working amplified player :),
exception there some high frequency "brum" and some "pop" on start but i think i can fix it easy :)
Thanks again.

[Argento7]

Hello again,
yesterday i finish this unit and now we have working amplified player :),
exception there some high frequency "brum" and some "pop" on start but i think i can fix it easy :)
Thanks again.
You need some capacitive filters... look board closer and populate! Use datasheet and pay attention at test circuit.

[kalosbg]

Argento7 (http://www.digital-kaos.co.uk/forums/members/72569-argento7/), can you send me datasheet for some other audio player for mitsubishi with LA4708, because i can't find best value for filters elements. Thanks

[Argento7]

Argento7 (http://www.digital-kaos.co.uk/forums/members/72569-argento7/), can you send me datasheet for some other audio player for mitsubishi with LA4708, because i can't find best value for filters elements. Thanks
Ok friend, look pics. Im a bit busy now, but if you need more help please wait for me.

[Argento7]

Some more, with info.

[kalosbg]

Thanks m8, but there many differences in my player. I think thah i find another configuration to filtrate this noises. Thanks again :)