PDA

View Full Version : help scenic edc 15.5 virgin



icar
20th February, 2012, 06:28 PM
hi guys,
e try with renault immo decoder to make virgin this ecu, but without success!
Could somebody make it from file?
ecu BOSCH 0281010077
eeprom 24c02

Thank you in advance

KILL_THE_IMMO
20th February, 2012, 07:04 PM
here u go , it is virgin

icar
21st February, 2012, 01:11 PM
here u go , it is virgin

hi mate,
with this file car doesn't have power and no diagnostic to engine ecu:(. have you got another?

babouches
21st February, 2012, 06:14 PM
try this one too !

icar
21st February, 2012, 06:50 PM
everything is ok, car starts and has power.
problem was... i didn't unzip file before programing

Thank you KILL_THE_IMMO:top:

germanml
27th February, 2012, 10:56 PM
hello friends, I have a case with 1.9 dci scenic, does not start, just show hand braker problem, some times, but can?t start it, any idea?? I checked fuses, relays, relays on UPC , ......
thanks in advance

icar
27th February, 2012, 11:54 PM
hello friends, I have a case with 1.9 dci scenic, does not start, just show hand braker problem, some times, but can?t start it, any idea?? I checked fuses, relays, relays on UPC , ......
thanks in advance

give us more info about the car, year? engine code? faults code when doesn't start? does starter operate?

germanml
28th February, 2012, 09:56 AM
Hello Icar , It is a 2002 1.9 DCI scenic II , I couldn't scaned, dashboard show steering unblocked, so "press the brake and start"" but it doesn't start, you can hear only a relays making contact, I checked all fuses relays, UCH and UPC but I need some wiring diagram to make a diagnosis of all wires, could you give me some help???? thanks again

bursuc
28th February, 2012, 10:09 AM
check the starter

shadow12
29th February, 2012, 11:59 AM
I also have problem with immo on this ecu, if I use above virgin file from (kill the immo) will ecu recode itself or need reprogramme with clip

germanml
29th February, 2012, 02:58 PM
hello bursuc ,I checked it but still the problem, I think there is a problem with UPC or UCH , because sometimes adjust the harness so the dashboard change message " electronic anomaly"