Immo citroen c1

[joatel]

Hi friends

Could someone Tell me if is possible immo off on citroen c1 1.0 With ecu 0261208702
I don't find the bsi, i presume that don't exist on this car. How e can put this car working?

Regards

[KILL_THE_IMMO]

bsi exist in the left side

[joatel]

Is possible remove immo on this car?

[KILL_THE_IMMO]

that is it mate:party :

[joatel]

Normaly what eeprom i can find on this bsi?

[KILL_THE_IMMO]

normaly it is 95160

[joatel]

Thanks mate. I can't find nothing for this car. With witch program e can remove the immo on this car?

Sory for my stupid questions.

Regards

[KILL_THE_IMMO]

SORRY FRIEND I DO A MISTAKE
this is immobox AND EPROM is 93c56/93c66/24c04 8 pin SMD package.


sorry again

[KILL_THE_IMMO]

search near dashboard

[KILL_THE_IMMO]

Location of unit: Behind glove box or low centre onsole or high centre console

[joatel]

thanks friend. Then you help me clear the immo?

[joatel]

i found it.
can anyone help me clening the immo

[joatel]

anyone? please

[KILL_THE_IMMO]

now u can generate a new chip

just post a 4d chip data ,and sameone in DK can insert it to dump

[KILL_THE_IMMO]

if u have tango or tmpro u can do it urself

[joatel]

i don't understand...

[KILL_THE_IMMO]

ur file is correpted read it again

[joatel]

try now please

regards

[Aniskey]

Citroen c1 is like toyota yaris id chip is id67 and you can program it directly with sbb without pin code

[joatel]

hi
i need remove immo. i only have upa for due this....

[ION CRISTI]

hi
i need remove immo. i only have upa for due this....
where is located immo box. i have the same car but not find the immo box. thaks very much

[obdsystems]

immo box is inbetween steering wheel and tough to remove.

I bet you 1st removed the remote locking box. easy to get confused.


This is a toyota system based on Argo

[keygargoil]

you cannot remove the immo on a c1 it is a toyota aygo rebadged you need to read the immo box and chip 4d70 from key and post here to add the key

[bunda]

Hello

I have a customer with Citroen C1 and all keys lost with immo box 89780-0H020 and 24c04w eeprom.
Please help me someone learn new keys?


KEY1:

PG 1: 33
PG 2: 8B
PG 3: 70 5A 92 01
PG 4: XX XX XX XX

KEY:2

PG 1: 53
PG 2: 67
PG 3: B2 41 F2 14
PG 4: XX XX XX XX

(4D, ID67)

Thanks

264909

[bram380]

new dump key added:

[bunda]

okay, i test and report.
Thank you very much

[bunda]

it works perfectly!
thank you again

[gokey]

hi
have a all key lost situation
need add key to dump
citroen c1
tx

33
2D
57 2A 11 02


try with avdi
but not sure, car is not to my store

[gokey]

immobox 89780- 0H021

[gokey]

thanks mr BRAM380

[cristi_onofrei]

I need some help too please

abrites only f*** me all day

all files from archive don't work. still have DTC " unregistered key"

Transponder recognized as TMS37145 80-bit
ID 6D - 67/68/70 - JMA TP xx
Password: B3 - Locked
Identifier: 15 - Locked
Serial number: 4A90DD84 - Locked
Secret key: Locked
Toyota 4D-70

Transponder recognized as TMS37145 80-bit
ID 6D - 67/68/70 - JMA TP xx
Password: B3 - Locked
Identifier: 15 - Locked
Serial number: 4A9C9D84 - Locked
Secret key: Locked
Toyota 4D-70

Many thanks!

[bearheroes]

Abrites tag key tool has huge problem...post data of an id70 key P1:33/53
Generate it with other tool or get a used key and post data here.

[cristi_onofrei]

I have only 2 new keys with P1 83 from dealer. and one 4D destroyed by abritus too

Transponder recognized as Texas Crypto
ID 4D - 67/68/70 - JMA TP xx
Password: 32 - Locked
Identifier: 4A - Locked
Serial number: 508C1001 - Locked
Secret key: Locked
Toyota 4D-67

[bearheroes]

the one you posted is id-67...you need id-70

[sl4ck]

Virginise Immo box and start key learning procedure with Diagbox, the easyest way!

[vincent1974]

hi
with no key,
first, i read the immobox with orange5
second, with avdi write precode in the 4D67 transponder
third, i learn the key by obd with sbb
and it works

[cristi_onofrei]

I tried learn with t300 -> no success
I tried to make virgin and IT II say: " immo already in automatic learn mode"
PP200 after ask me to put both new keys to ACC+ position ask again to put 5 times old key of car to ACP+ position but I don't have old key:(

Maybe I don't make virgin well but in data list appear " ready to learn new keys"
Somebody can put my B3 keys direct to dump please?
I don't want to f*** up more 4D chips . I have 3 till now

[gokey]

tmpro done this job

[bearheroes]

in file 24c02 valea mircea iimo +key1 is the first key in position 2
in file 24c02 valea mircea iimo +key3 is the second key in position 3
Your transponder is recognised as 80-bit...this is not proper transponder
you need something like this

Recognizing transponder...
|||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||
Transponder recognized as YS-01
ID 4D - 60 - JMA TP 06/19
Password: 33 - Locked
Identifier: C5 - Locked
Serial number: 11223344 - Unlocked
Secret key: Locked
Toyota 4D-70

[cristi_onofrei]

tmpro done this job

tmpro want new chip and I'm not sure if work

[cristi_onofrei]

in file 24c02 valea mircea iimo +key1 is the first key in position 2
in file 24c02 valea mircea iimo +key3 is the second key in position 3
Your transponder is recognised as 80-bit...this is not proper transponder
you need something like this

Recognizing transponder...
|||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||
Transponder recognized as YS-01
ID 4D - 60 - JMA TP 06/19
Password: 33 - Locked
Identifier: C5 - Locked
Serial number: 11223344 - Unlocked
Secret key: Locked
Toyota 4D-70

sure isn't good??

keys was ordered to dealer with VIN

[cristi_onofrei]

Solved. You right. Dealer key wasn't good
I use two new 4D chips and make 4D-70
At the end abrites do job to finish

Many thanks to all

[gokey]

tagkeytool write id70 to dump ?

[cristi_onofrei]

yes, first time I make one 4D-70 33 from blank 4D and tagkeytool add to position 0
second time I add one new blank 4D and tagkeytool make automatic 4D-70 53 and add to position 1

[alclot]

Hi. I have immo box 89780-0h020 citroen c1. I check key with tango and say is ok but no start car. can you fixit this?
Post dump immo box and file read key tango.
Thanks in advance ;)

[alclot]

Hi again. I forgot data key ;)

[alclot]

help me please ;(

[Bllinda]

read ECU eeprom ....
keys in order.
second.. .. 03 E3 85 ..

[alclot]

read ECU eeprom ....
keys in order.
second.. .. 03 E3 85 ..

Hi Bllinda. Excuse my ignorance but I do not understand what you want me to explain. Sorry :(

[Bllinda]

With key everything is in order, damp. read EEPROM ECU unit.

[alclot]

With key everything is in order, damp. read EEPROM ECU unit.

Hi again. Here e2prom ecu.

[Bllinda]

maybe try to succeed.

[alclot]

Hi again. Here e2prom ecu.


Hi Blinda. No work. Car have same DTC (B2799 UCE IMMO). Any idea?
Thanks in advance ;)

[alclot]

Hello again. Does anyone have the files of the entire set to start ok?
I'm crazy with this car. The keys are testing with Tango and good, but the car will not start.
Help me please ;)

[autobo]

check wires between ECU and IMMO

[milzal]

Hi, in what programmer you read 24c04W6 . Elnec, wellon,UUSP-M, Xtool read dump like is on first page = corupted. This is not standar I2C memory maybe.

[rokibar]

Hello again. Does anyone have the files of the entire set to start ok?
I'm crazy with this car. The keys are testing with Tango and good, but the car will not start.
Help me please ;)
my friend. write my dump in immobox and start the car. 432871


hahahaha how much old post?

[milzal]

I need only info in what read this 24c04W6 . I have imo box with lost keys. I have original Abritus , where is this supported, but all time read dump like on first page (broken data maybe). Ill my programmers read it like I2C eeprom, and this is not right maybe.

[rokibar]

I need only info in what read this 24c04W6 . I have imo box with lost keys. I have original Abritus , where is this supported, but all time read dump like on first page (broken data maybe). Ill my programmers read it like I2C eeprom, and this is not right maybe.
use any serial programmer to be sure that reading good. choise proper manufactory and post dump here. maybe halp you.

[milzal]

Thank you, dump is here. Read with elnec (memory is ST 24C04W6 and in menu is ST24C04 - W only). If read with wellon,xtool, uuprog-S, Xprog..., all time is same.

[rokibar]

bad read friend. try st 24c04 soic8 package without any leters

[lion0304]

Thank you, dump is here. Read with elnec (memory is ST 24C04W6 and in menu is ST24C04 - W only). If read with wellon,xtool, uuprog-S, Xprog..., all time is same.

Maybe you read the wrong box.

Immo box should be: 89780-xxxx

Other is central locking

433027

[key]

this is no immo box.

Thank you, dump is here. Read with elnec (memory is ST 24C04W6 and in menu is ST24C04 - W only). If read with wellon,xtool, uuprog-S, Xprog..., all time is same.

[milzal]

ok, thank you. Imo box looks similar, thank you.

[milzal]

Abrites (original) write about can use new or used Texas 4D or blank TPX2 transponder. Texas must be 4D70 or can use new 4D63 too (this i have here) ? Abrites donot write what 4D version must use. Blank TPX2 have too, but is much big.
Thank?s

[rob h]

Dont use the 4d67.
Go with the tpx2, mill the key out a bitt.

[milzal]

Hi, i buy 4D-70 transponder for Toyota, but china "engineers" send me this transponder on picture. Abrites read like DST+ . Is possible use DST+ like 4D-70 transponder in abrites ? Support in Abrites is not good,he write about contact local dealer, but he is not autor off keytool and donot know how this work :-(
https://www.aliexpress.com/item/100-working-good-quality-Auto-car-transponder-4D-70-Chip-for-Euro-Toyota-Smart-key/1928133678.html?spm=2114.13010608.0.0.8SP2mF
437685

[Darakulus]

Hello to all !!!
I got some trouble too.
Peugeot 107, b2799 code, no communicate to Immo - Box.
Wiring is defect, that's possible,
my ecu was damaged by a friend, he killed my org-Ecu like electric shock . He read the EEPROM with damaged USB, tool,,
---killed by idiot
I buy a new one - Bosch 261208702 -89661-0h022 (eprom,95040)
Immo - box is a new one too (epr.24c04)
, from secondhand shop,,,
,,,.now i need help to take the Immo off in ECU -
i try more than one time the synchro procedure (OBD) from pin 4 to 13 ,but no result,

car starts 1 - 2 sec than of
Key transponder are ok and the Master key is ok too.

I got a brand-new flash tool ... AS-Programmer
OBD2 mini adapter Bluetooth
And I need help , or advice
thx

[rafal]

post files from ecu and immobox

[Darakulus]

Wow , Fast Answer !!!
I got only The Original file of the Valeo-Immobox 24c04 .bin
I have downloaded a another one original file, is not the file of my new ECU. e-prom.95040
the tool what i bye, is big crap . this sh... will not stay on the right place of the 95040 chip .... grrrrrrrrrrrr chinise cheap sh..... its flip of like a frog ... shiiiii...
sryyyyy for my Lang witch..
I am a little in rage.

how to flash without De soldering this IC 95040 , maybe whit a bread-board ???

[elektronik325]

Hi, why complicate your life? Did you change engine ecu? Did it lose sync due to a weak battery? Connect the tester and see in the immo parameters if the key is read correctly.

[Darakulus]

Hy Elektronik325 !!! thanks for the help !!!! I am happy to find this Forum !!!!

yes The ECU was Changed.
a Friend of me ,try to take the Immo-Off in The ECU , and he Killed the hole Engine-ECU, total stupid ,
I guess ,that main problem was the wire and the Immo-Box becomes to much volts on wrong wire and burns. something in the Immobilizer. (I smell something on Processor of the Immo-box)
The Test report are OK, Transmitter works fine ,key transponder is OK too ,Car opening System works fine , The problem is not from a weak battery, Only one Code was stored In ECU -B2799
it must be a damage wire or a broken connection , nobody was find that failure , 3 Guys of Electronic didn't find it ... Grrrrrrrrrrrrr , and than was the Idear to take hole Immo-offf.


My ECU FILE PLZ Take IMMO OFF
when i start the Procedure (OBD Pin 13 -Pin 4)
Normaly must be blinking the ABS light fast and than we now it start the sync OR ???
in My Case ,this light start blinking like a Failure Code . 3*3 than 1 time 7times and start again 3*3 than 7 times .,,
One thing is Strange too , the Color of the wire on the immo is ( orange and Rosa (pink) pin 13,12) and i try to connect the 2 new wires but nothing happens. it looks like that i have the wrong schematic of wires, now i find another plan of it , in this case i have to bridge, Pin 13 (rosa) from Immo, to pin 6 on ECU (green),, and pin 12 orange, to Pin 38 Lila (purple) ... can this be Right ???

today i inspect the new Immobox ,(secondhand) but inside looks like a brand new Part , all lanes blinking, everything looks newwwwww

[elektronik325]

Hi, in this ecu you will not do immo off from the file. It's best to fix the system. The wires change color in the box under the hood near the battery. Measure the cable from the immo box to the ecu if you have a pass. Frequent cause damaged wiring harness on the engine. Or no contact in the box under the hood.

[avital]

For ECUs 0261208702 , 0261208704 from 1KR-FE engine , always fast and clear solution what i use is custom emulator immo.
Wires we cut near ECU because this car have many problems with bad connections and communication ECU -IMMO stucks, also i find many times damage immobox and replace by the emulator.


970402