peugeot 206

[radiosolutions]

need mileage change in clock and bsi dumps attached. mileage is presently at around 95000, need them changed to 59100. thanks


is bsi changed to zero mileage, then the clock rights the new

[radiosolutions]

is there any software so i can change the mileage on these cars, will tacho universal do this, thanks

[smokey08]

NY04 should work ok. Try these

[radiosolutions]

i have ny04, but how do you change the mileage using this program, i can only seem to use it to calculate mileage, thanks.

[radiosolutions]

thanks smokey, can you just advise, is the mileage km or miles, as i needed 59100 miles, thanks

[PremierD]

thanks smokey, can you just advise, is the mileage km or miles, as i needed 59100 miles, thanks

Use this for the dash mate ..

[obd.tech]

Question for the knowledge bank here.....if you change the speedo/and or bsi (used items)on a 206, do they always make the displayed mileage the higher saved reading from either of these modules?
what do you have to modify to stop this or which module do you have to reprogram? if ive made myself clear?
thanks obd

[obd.tech]

is the mileage also saved in the ecu on any peugeots?

[PremierD]

Question for the knowledge bank here.....if you change the speedo/and or bsi (used items)on a 206, do they always make the displayed mileage the higher saved reading from either of these modules?
what do you have to modify to stop this or which module do you have to reprogram? if ive made myself clear?
thanks obd
Yes is the Answer mate

[smokey08]

i have ny04, but how do you change the mileage using this program, i can only seem to use it to calculate mileage, thanks.

Right click the dump file in the lefthand side of the program and then choose rewrite.

The file I made was in km. Use the one premierd has made you.

[obd.tech]

THANKS PREMIER
so say orig car is 59k miles....fit used bsi(95k)....dash becomes showing 95k......is there anything can be done to stop this before fitting bsi (virginise?) ......or which do you have to reflash.....dash or bsi....or both?
the learning curve!
thanks obd

[obd.tech]

"is bsi changed to zero mileage, then the clock rights the new"

i guess this is what radio originally asked......no one answered clearly?

[Meat-Head]

THANKS PREMIER
so say orig car is 59k miles....fit used bsi(95k)....dash becomes showing 95k......is there anything can be done to stop this before fitting bsi (virginise?) ......or which do you have to reflash.....dash or bsi....or both?
the learning curve!
thanks obd


unplug the speedo to stop it updating for diagnostic purposes.

and /or just swap thee eeprom over on the back 95160 - this applies to 2001 onwards (two buttons on dash)

earlier ones hc05 - but check that

[radiosolutions]

thanks premier d, all sorted with your file, thanks smokey my fault didnt make myself clear i should of said miles instead of km, thanks

[obd.tech]

meaty.....do you mean...swap the eeprom over in the bsi?
thanks

[Meat-Head]

meaty.....do you mean...swap the eeprom over in the bsi?
thanks

Yes, swap the 95160 over on later ones, job done hi-ho silver away.

If you want to know where the miles are stored, sorry, ask premeird

Meat

[obd.tech]

thanks meaty,
are all the bsi configurations also stored in this chip?
is this the chip that can get scrambled if the battery is disconnected/connected incorrectly(u no the proceedure).

[Meat-Head]

yes do beleive this to be all true 95160 use search botton


meat - outside in parking lot on cell phone