ascotauto
22nd February, 2012, 04:34 PM
Hi Guys i need some help please. I have this car pics attached of controller. Faults cannot clear and i assume its on the controller due to accident car had. Here are the faults and to test i bridged out sensors in engine bay with 1 ohm resistors to make driver and passenger side faults go from current to stored. I did order sensors so in the meantime i need to clear crah data.
Faults with MB Star
-90B0 component B48/2 side frontal acceleration sensor has short to ground.
-Component B48/1 drivers side frontal acceleration sensor has short circuit to ground
- The ignition Value in the ignition component R46 (drivers side buckle etr squib) is too high
Now to me the 1st two faults are related to the controller. Is there anyone that can assist me in clearing airbag please.
Once notified or replied i can load dump as i am not clear which chip on the board it is. Thanks to those guys who do reply well in advance
Faults with MB Star
-90B0 component B48/2 side frontal acceleration sensor has short to ground.
-Component B48/1 drivers side frontal acceleration sensor has short circuit to ground
- The ignition Value in the ignition component R46 (drivers side buckle etr squib) is too high
Now to me the 1st two faults are related to the controller. Is there anyone that can assist me in clearing airbag please.
Once notified or replied i can load dump as i am not clear which chip on the board it is. Thanks to those guys who do reply well in advance