Rover 45 immo off

[franke232]

Hi,
I need immo off in Rover 45
Ecu Motorola M3P01DSG with 93c66
Is possible?
Thanks!

[dgmcan]

Hi!

Try this file.

Don't forget to cut immo line.

[franke232]

bad luck! the car still doesn't start
I hope to find something, if it will notify
thanks

[richard27]

I searched the forums I found it maybe can help
Engine immobilisation override
(Emergency key access code)
If the handset is lost or fails to operate, the
engine can be re-mobilised by using the key to
enter the emergency key access code (this four
digit code is recorded on the Security
Information card).
Enter the code as follows:
1) Using the key, turn the
driver***8217;s door lock (clockwise),
to the LOCK position and hold
in this position for at least 5
seconds. Then return the key to
the centre position.
It is now possible to use the key to enter the
numerical value of the four digits of the
emergency key access code, as follows:
2) Enter the FIRST digit of the code
If the first digit is 4, turn the
key to the UNLOCK position 4
times. Ensure the key is FULLY
returned to the centre position
after each turn of the key.
3) Enter the SECOND digit of the code
If the second digit is 3, turn the
key to the LOCK position 3
times. Remember; the key must
be FULLY returned to the centre
position after each turn of the
key.
4) Enter the THIRD digit of the code
If the third digit is 2, turn the
key to the UNLOCK position
twice, ensuring that the key is
returned to the centre position
after each turn of the key.
5) Enter the FOURTH digit of the code
If the fourth digit is 1, turn the
key to the LOCK position once.
Ensure the key is FULLY
returned to the centre position
afterwards.
6) Finally, turn the key to the
UNLOCK position one more
time; this will re-mobilise the
engine.
If the code has been entered successfully, the
anti-theft indicator light will stop flashing and
the engine can be started.