PPD 1.5 03G 906 018 FG

[darwins]

Hello Friends

Can this 2008 Passat (Siemens PPD 1.5 03G 906 018 FG) ecu be read/written with cloan BDM100 (MPC561MZP56) ?

Does anyone have pin out for used connections are all 10 pads used ?

I know where pin one is but my adapter has broken some where only 2 pins are left in tact :hmmmm: So I will be soldering directly..

I think the original ecu is dead, is there a virgin option or immo off to enable a used unit to be used ?

Any help suggestion would be great.

Regards

Darwins

[3in1san]

Hi
Just copy eeprom
Pinout:

[darwins]

Thank you, your a life saver...

Does the manufacturers of X-Prog supply this info if you have the genuine programmer ?

[3in1san]

No Xprog dont have info about ecu pinouts

[darwins]

Is it the ATMEL 25320 eeprom which needs dealing with?

[ankara06]

Is it the ATMEL 25320 eeprom which needs dealing with?

replace it and start car if both ecu is same..if not read it with bdm.