View Full Version : Immo OFF MED9.1 Audi TT
thomas76
23rd February, 2012, 01:24 PM
Hi,
You can give me OFF for AUDI TT 2.0 TFSI or just PIN code, i have carprog so i can change pin code in dashboard.
ECU : MED9.1
0 261 S02 084
0J8 907 115
HW : H16
Thanks in advance
chriskross
23rd February, 2012, 01:58 PM
hello think this dump is encrypted can't get pin.
immobypass you also have to read flash.
Mister Mint
23rd February, 2012, 03:40 PM
Hi,here is your immo off file attached and the Login is 23130,you can test and I say godbye:coffee:
thomas76
19th May, 2012, 10:36 PM
Hi,
Sorry for this long time ... Car not start :(
thomas76
21st May, 2012, 07:22 PM
Solution for me ?
banabana
21st May, 2012, 08:01 PM
you need to read flash and eeprom AND PAST HERE
furnata
21st May, 2012, 08:06 PM
Try this m8 -should work
pass-pm
thomas76
4th June, 2012, 09:33 PM
File is OK car start no problem, but blocked to 4000rpm ...
You have solution ? No faults in ecu memory.
Thanks :hello:
thomas76
7th June, 2012, 08:05 AM
No solution for me ? :cheers:
thomas76
24th June, 2012, 09:46 AM
Ok it's good, car run no problem !
Just mass air flow problem i replace and it's good now very thanks "furnata (http://www.digital-kaos.co.uk/forums/members/128246-furnata/)" !!!
furnata
24th June, 2012, 10:30 AM
Too many PM's so i give the pass here - medoff
datapage
26th June, 2012, 03:06 PM
Too many PM's so i give the pass here - medoff
med 9.1 0261s02080 bora please immo off
haroutioun
26th June, 2012, 04:26 PM
med 9.1 0261s02080 bora please immo off
Hi,
must read and load here the flash 2, eeprom not enough to get immooff.
furnata
26th June, 2012, 09:16 PM
Try this - pass in PM
datapage
27th June, 2012, 02:51 PM
I test this, tanks furnata (http://www.digital-kaos.co.uk/forums/members/128246-furnata/).
haroutioun (http://www.digital-kaos.co.uk/forums/members/248868-haroutioun/): here full bdm
129063
129064
129065
datapage
27th June, 2012, 02:54 PM
See photo module, med9.1
haroutioun
27th June, 2012, 03:46 PM
I test this, tanks furnata (http://www.digital-kaos.co.uk/forums/members/128246-furnata/).
haroutioun (http://www.digital-kaos.co.uk/forums/members/248868-haroutioun/): here full bdm
129063
129064
129065
ok try this ...
RallyeCAV606
8th August, 2012, 10:46 AM
You can give me OFF for Golf R20 2.0 TFSI or just PIN code
haroutioun
8th August, 2012, 03:00 PM
You can give me OFF for Golf R20 2.0 TFSI or just PIN code
Hi,
1) to get immo off most to load the flash 2.
2) about pin try this pin (13515).
RallyeCAV606
8th August, 2012, 03:56 PM
I check the pin twice unfortunately I get wrong pin display
RallyeCAV606
9th August, 2012, 06:20 AM
I only have Carprog and VCDS how can I read flash?
Is that possible?
haroutioun
9th August, 2012, 06:29 AM
I only have Carprog and VCDS how can I read flash?
Is that possible?
to read flash u most have (BDM) programmer.
RallyeCAV606
9th August, 2012, 07:53 AM
Unfortunately I don't have this yet.
What about pin I can manage is it possible the pin you gave to be wrong? The ECU don't accept it.
Is there any specific procedure other than the usual one?
I actually try to change the ECU I now the old pin and I need the new pin to made the match to the car.
haroutioun
9th August, 2012, 09:15 AM
Unfortunately I don't have this yet.
What about pin I can manage is it possible the pin you gave to be wrong? The ECU don't accept it.
Is there any specific procedure other than the usual one?
I actually try to change the ECU I now the old pin and I need the new pin to made the match to the car.
1)first try,did your ecus can open Chanel 50? to write the pin code?
if yes, so after try to get pin code by (CodeCard) from new ecu.and after can u adapt...if your ecus can't open Chanel 50.so in this case open the 2 ecus and swap eeprom + mcu=flash.after the car can start.
RallyeCAV606
9th August, 2012, 09:27 AM
I can't find the new ecu pin to login
so I can't open the chanel 50
yugo45
15th August, 2012, 05:04 AM
It is not possible to do this with VCDS.
speedtuningusa
24th September, 2012, 09:09 PM
Hello there,
to all the experts can anyone help us with this, we would need the immo off for a new Audi TTRS 2012 MED9.1, i have the ST95160 and the ECU flash file attached. thanks a lot
garagetech
24th September, 2012, 11:00 PM
hi there you go mate let me know how you go
speedtuningusa
24th September, 2012, 11:29 PM
cool thanks we will test it right away
speedtuningusa
25th September, 2012, 12:16 AM
hi there you go mate let me know how you go
Sorry man, immo is still on, dies right after a split second, thanks for trying
yugo45
25th September, 2012, 03:48 AM
Hello there,
to all the experts can anyone help us with this, we would need the immo off for a new Audi TTRS 2012 MED9.1, i have the ST95160 and the ECU flash file attached. thanks a lot
Are you sure that is MED9.1? Lot of new models came with MED17
speedtuningusa
25th September, 2012, 04:27 AM
yes it is guaranteed a MED9.1, just like the R20, TTS or TTRS, read it with BDM
nynhp
26th September, 2012, 04:04 AM
can someone help me with Immo Off 2012 TTRS Also please
Thank you
File Attached
Main data and Eeprom
RaraK
28th September, 2012, 03:08 AM
good luck, i was looking into this too :( no success
LauAlf
31st December, 2013, 09:07 PM
can some one send me the original eprom of a cluster TTRS or RS3?
Thank tou
TULGEYWOODMAN
15th January, 2014, 10:04 PM
Try this m8 -should work
pass-pm
Have you this solution still please?
pass please
thankyou
yugo45
16th January, 2014, 09:50 AM
Have you this solution still please?
pass please
thankyou
http://www.digital-kaos.co.uk/forums/f178/immo-off-med9-1-audi-tt-257245/#post1604666
ssamil1
19th February, 2019, 11:28 AM
Try this m8 -should work
pass-pm
I cant down this file :(
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.