View Full Version : RNS 510 flash code
kuti
23rd February, 2012, 07:57 PM
Hi Friends
Where is code in RNS 510 SIEMENS VDO.
Flash AM29 or ST ?
Thanks
Argento7
23rd February, 2012, 08:16 PM
Look here, post #6 Mr. Murat! I dont know if same model... :hmmmm:
http://www.digital-kaos.co.uk/forums/f176/i-need-convert-software-rns-510-a-232098/
kuti
23rd February, 2012, 09:23 PM
I have been seen at this post.
I just need confirmation that code is in am29f400 before desolder it.
I don't think that code is in EEPROM only counter.
oemrepair
24th February, 2012, 09:24 AM
Code in flash. But there is not one flash IC inside. :D
And even you will get it, it encrypted well, so forget it.
And better leave radio untouched, because if it gonna die,
you are unable to make it alive again.
kuti
24th February, 2012, 10:09 AM
yes yes yes, code encrypted but I know how to change for known code :) If you don't whant to help don't write stupid post.
oemrepair
24th February, 2012, 11:48 AM
After change code is necessary to calculate checksum. So try it. :)
jokersat
1st March, 2012, 06:59 PM
flash = s29gl128 = 56 pin
kuti
1st March, 2012, 08:03 PM
in my Version there is 3 flashes:
S29GL032 TSOP48
S29AL016 TSOP48
AM29..... TSOP48
There is no flash 56pin
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.