PDA

View Full Version : Iveco Daily DPF off



Manmart
24th February, 2012, 09:14 AM
Hello. I need to remove DPF from Iveco Daily EDC16C39
ECU Bosch 0281012193. Do I need after the removal of the DPF with ecusafe from dump, correct checksum with winols or other program?

soundnavigator
24th February, 2012, 10:15 AM
Ecusafe don't work in this case, I think.

Best regards.

Manmart
24th February, 2012, 11:14 AM
Ecusafe don't work in this case, I think.

Best regards.

Are You think or you sure?

Manmart
24th February, 2012, 02:00 PM
ECUSafe does not remove the filter from the dump..I have dump, full flash read by XprogM via BDM. Can anyone help with the removal of DPF. Thanks in advance.

yas200979
25th February, 2012, 01:44 PM
I make dpf_off this car with Iveco 3.0HPI.
I can help you. Worked 100% - no limp mode after 500km.
If you need help send me PM.

slonenok1980
25th February, 2012, 08:25 PM
2.8 3.0 no problem

magictuners
26th February, 2012, 08:39 PM
I also can help you with this file

Manmart
28th February, 2012, 11:03 AM
2.8 3.0 no problem

I have Iveco Daily 35s14 with 2.3 turbodisel engine.

yas200979
1st March, 2012, 09:01 AM
2.3HPI - no problem dpf off.

arvedo
17th April, 2012, 08:06 PM
HELLO GOOD AFTERNOON I CAN HELP ELIMINATE FAP
IVECO EDC16C39
0281012193
READ GALLETTO

monitel_service
17th April, 2012, 08:36 PM
your file pass in PM

arvedo
17th April, 2012, 09:37 PM
proves it by tomorrow must do more to load the file has the checksum. thanks

monitel_service
17th April, 2012, 09:48 PM
only write the file

arvedo
14th May, 2012, 09:23 AM
DOES NOT WORK AGAIN SHOWS FAP REGENERATION
ANYONE CAN HELP ME, PLEASE SEND PM

spawns3
14th May, 2012, 03:14 PM
DOES NOT WORK AGAIN SHOWS FAP REGENERATION
ANYONE CAN HELP ME, PLEASE SEND PM


Hi mate , the solution is manually , 1 switch .

arvedo
14th May, 2012, 03:30 PM
HELLO GOOD AFTERNOON AS I CAN SO TELL ME YOU DO NOT NEED TO MODIFY ECU