GOLF 4 1j0 920 806 g RB8

[karmann]

I try odometeradjust Golf 4 2003. year with the number 1J0920806G KOMBI+WEGFAHRS. RB8 V25.

The millage always is blinking...is my Tacho crash......??????????????????????
the flashing mileage, can not repair.....has begun to flash when chosen odometeradjust Golf 4 and correct the mileage.

[haroutioun]

I try odometeradjust Golf 4 2003. year with the number 1J0920806G KOMBI+WEGFAHRS. RB8 V25.

The millage always is blinking...is my Tacho crash......??????????????????????
the flashing mileage, can not repair.....has begun to flash when chosen odometeradjust Golf 4 and correct the mileage.
hello,
your dump ok,maybe the problem in the dash or from your (scan device) if u want write which number u want to write mileage here, after we adjust for you,& try to rewrite and see if the problem solve .

[karmann]

I tried a couple of dump, then the board is ok, just immo lights on and car will not start.
mean we should orginal dump for tacho.
I think mine was not good.

[COSO_GARAJ]

The dumps you have written are ok if the cluster is working now.You must adapt the immobilizer with PIN nr

[dfi]

Here is the fixed version. Try not to do it with super vag again... use vag k+can to change odo and write this dump.

[Ocin]

If you tried super vagK+can on rb4 and rb8 dash you must disconnect battery.

[cosmind]

Hello , I have a dash with same problem... mileage always is blinking.
DFI, can you fix this dump, please

thanks

[dfi]

Hello , I have a dash with same problem... mileage always is blinking.
DFI, can you fix this dump, please

thanks

here you go

[cosmind]

thanks man, it's working

[dfi]

thanks man, it's working

You're welcome

Sent from my GT-I9100 using Tapatalk

[SweetDog]

Hi, I also have a dash with same problem with mileage blinking. I'm looking an orig dump for this dash
1J0 920 826 A Motometer RB8 V11 engine 1.6i and not find it anywhere.
DFI, can you repair this dump, please

Thank's

[dfi]

Hi, I also have a dash with same problem with mileage blinking. I'm looking an orig dump for this dash
1J0 920 826 A Motometer RB8 V11 engine 1.6i and not find it anywhere.
DFI, can you repair this dump, please

Thank's

Here is the repaired dump:

[SweetDog]

I will try tomorrow, and post the result.

[SweetDog]

Today i program the dump in dash, and work 100%. Thank's again for the quick answer.

[dfi]

Today i program the dump in dash, and work 100%. Thank's again for the quick answer.

You're welcome m8, thanks for the feedback.

Sent from my GT-I9100 using Tapatalk

[znakedwrx]

Hi guys,

I have exactly the same problem with 1j0920806g - mileage IS BLINKING after Super Vag K+Can Plus 2.0.

I hope someone can help me :(

[paczus]

Hi guys,

I have exactly the same problem with 1j0920806gx. Please help me.

[dfi]

Hi guys,

I have exactly the same problem with 1j0920806gx. Please help me.

Here you go. You can write dump with vag k+can commander and a kkl interface. Pass in PM. Good luck!

[d2mike]

Hi guys,

I have exactly the same problem with 1j0920806g - mileage IS BLINKING after Super Vag K+Can Plus 2.0.

I hope someone can help me :(

I don't know if you dump was also fixed?!
Try and report. Pass via private message!

[mchalisn]

Same problem here... please check the eeprom! Read with Vag Tacho 3.01

[dfi]

Here you go. pass in pm.

[mchalisn]

Thanks works fine now!

[dfi]

Thanks works fine now!

You're welcome. Thanks for the feedback.

Sent from my GT-I9300 using Tapatalk 2

[Ocin]

Hi, someone can repair this dump ? don't found what is wrong in dump
mileage flash all time.
Thanks

[Lexas]

Ocin, pass PM

[dfi]

Hi, someone can repair this dump ? don't found what is wrong in dump
mileage flash all time.
Thanks

In case you still need it :

https://mega.co.nz/#!CEs0hYwS!c5OYMXjeQxwPteFZG0MmUdorim8_lfj0CQCY68r Nsus

pass in pm.

Sent from my GT-I9300 using Tapatalk 2

[Ocin]

Both file work, many thanks guys

[tomlib]

Hi, I have the same problem. Can I also please to repair my file? Thanks in advance!

[lupu_sandu]

Hi, I have the same problem. Can I also please to repair my file? Thanks in advance!
Your file ok, pass in pm.

[jackie86]

i have same problem.can repair my dump please??

[Lexas]

here you go jackie86, pass PM

[zmirosa3]

hello
golf 4 2003 1j0920806g rb8 v25....The millage always is blinking
please can you fix damp


http://speedy.sh/JkK8C/def.bin

[waldi1979]

Please fix my dump.
My mileage is blinking too.

[Lexas]

here you go

[gjuzel]

Dont tach this dash with super vag 2.0

Sent from my HTC Desire 310 using Tapatalk

[joolsik]

Hi friends,

I bought used dashboard on ebay, but the mileage is still blinking. Its RB4 Dashboard 1J0920806G. Can someone fix it?

Thanks

380728

[joolsik]

Hi... Should be ok now... Looks good... Thank you very much

[jomberykaso]

share the files without pass please to check them...I?m not a leecher...:roflmao:

[amaflo]

423560Hello. Please repairs dash 1j0 920 806 g rb8 v24s.
thank you very much

[nikz]

try this................

[pedjica]

Hello , I have a dash with same problem... mileage always is blinking.

1j0 920 826 c v18



Done.

[levisdj]

So what's the big secret here ? ... all passworded dumps

[Andrei2015]

hi, anyone can repair me this RB4 dump? Thx

[Cllau]

hi, anyone can repair me this RB4 dump? Thx

try this fixed....:wink:

[Andrei2015]

just tested dump, KM stoped flashing but OIL pressure lamp is on, can you fix? Thx

try this fixed....:wink:

[Andrei2015]

anyone can fix it?

[dragoshu]

Hello,I have def on dash after make reading of 24c04 and engine not start.
DACH:1J0 920 826 A dash Motometer V11
CAN SOMBODY REPAIRE THIS DASH DUMP?
thanks