Micronas 3217G + 24C32 - Xprog-m

[joolsik]

Hi friends,

easy question. How do I tell X-prog-m that I've already read the 24C32 EEProm to help me decode the micronas?? Thanks a lot. I've read it as Microchip 24xx32

[Manmart]

Hi friends,

easy question. How do I tell X-prog-m that I've already read the 24C32 EEProm to help me decode the micronas?? Thanks a lot. I've read it as Microchip 24xx32

Follow the link
ELDB Electronics (http://www.eldb.webuda.com/calc_vdo.php)
Best regards.

[joolsik]

Thank you, but this is for another Micronas type. In X-prog is build-in this function. But I have problem do bypass security of micronas... I dont know how to tell X-prog - use 24xx32 file... Or where is the problem.. I dont really know. :(

[eprommazza]

for cdc3217 need read 24c32 with encrypted data area
need connect all cable how explan x prog document

regards

[pacomasi]

Thank you, but this is for another Micronas type. In X-prog is build-in this function. But I have problem do bypass security of micronas... I dont know how to tell X-prog - use 24xx32 file... Or where is the problem.. I dont really know. :(
Hello
gives that error?

[joolsik]

Hi... yes... it can't bypass the security... I am not sure if I have to use data from 24c32 somehow...

[joolsik]

Have anyone already bypassed the security on Skoda Octavia II - 1Z0_920_842_D - micronas 3217G??

I still have the problems to bypass it using xprog. :(

I checked the connections... Everything. I dont know what's wrong.

Any help would be appreciated.

Thanks a lot.

[eprommazza]

Have anyone already bypassed the security on Skoda Octavia II - 1Z0_920_842_D - micronas 3217G??

I still have the problems to bypass it using xprog. :(

I checked the connections... Everything. I dont know what's wrong.

Any help would be appreciated.

Thanks a lot.

try raise pin?
try remove resistor 0 ohm?
check adapter errata shet pdf?
try also disconnect original oscillator
regards

[keygargoil]

what connections are you using im having the same problem iv read the 24c32 and the micronas wont read iv lifted pins 114 and 118 but nowt does anyone haave a connection diagramme for x prog so i can compare please

[eprommazza]

what connections are you using im having the same problem iv read the 24c32 and the micronas wont read iv lifted pins 114 and 118 but nowt does anyone haave a connection diagramme for x prog so i can compare please

the connection are ok in the x prog m

best regards

[dragan x]

xprog a safe mikronasa

[joolsik]

I use the tool Dashboard/Immobilizers to decrypt micronas... I dont try to read content of Micronas...

At least for now.