Peugeot 307 CC Problem

[Ocin]

Hi all,

After odometer correction on 307 CC year 2007, oil temperature gauge don't light up. (on left of dash)

I tried with original dump same problem (BSI and dash), check dash with PPS, no problem with LCD, no dtc.

Bsi coding is good, tried with bsi virgin dump and coded with pps

I tried another dash dump (but i don't remember if it had oil temp indicator) same problem.

BSI Johnson control (95128)
Dash Johnson control (95020)

Someone can help me

Thanks

[SDO]

Does the needle work still ? Have u checked the globe ?

[looly]

Definately check the bulb mate.

[Ocin]

Dash work fine, but temp oil doesn't appear.

Look at the pictures, the second picture lcd is tested with pps and it work fine.
I don't think it's Bulb

Thanks for your help

Regards

[SDO]

Very strange if it doesn't work with original dump, and everything else is working. R u sure it was working before u worked on it ?

[Ocin]

As you said very strange...
Yes it worked before.
And with original dump is the same, I tried several dump but don't work.

[smokey08]

Did you seen a light sensor (photodiode?) in the front of the dash when you had it apart?

[Ocin]

No light sensor.

I checked screen with PPS It work fine as I said, but when I checked "oil temperature" PPS show me "not operating"

[newgeniehex]

Hi all,

After odometer correction on 307 CC year 2007, oil temperature gauge don't light up. (on left of dash)

I tried with original dump same problem (BSI and dash), check dash with PPS, no problem with LCD, no dtc.

Bsi coding is good, tried with bsi virgin dump and coded with pps

I tried another dash dump (but i don't remember if it had oil temp indicator) same problem.

BSI Johnson control (95128)
Dash Johnson control (95020)

Someone can help me

Thanks
hello
maye your dump is corupted
try this dump
i don(t know the sw
it is for diesel or gazoil car
regard

[cokolo]

Try these dump is 100% correct . Car is 307cc 2008 year , tiptronic , gasolin . Try maybe help you :wink:

[SDO]

Bro, I would trace it from the sensor to the cluster. I don't know how to do that so will be going to an auto electrician, dont know if the temperature gets to the cluster direct from the sensor or thru bsi , or thru something else, cuz from what u r saying, it doesn't look like bad dump.

[Ocin]

This is the same thing with your dump friends.


the temperature gets to the cluster thru bsi, It seems to be a coding problem.

[newgeniehex]

This is the same thing with your dump friends.


the temperature gets to the cluster thru bsi, It seems to be a coding problem.
hello
have you remove the eeprom for read and write ?
maybe you have remove whit your station desolver whithout see a resitor smd or condensator??

[SDO]

Reset the bsi and see

[Ocin]

hello
have you remove the eeprom for read and write ?
maybe you have remove whit your station desolver whithout see a resitor smd or condensator??


Yes I removed eprom, I thought the same things, I checked all resistor around eprom.

I already reset BSI and coded with pps, same things

[leowii]

the car start ? key remote open the doors ?

[Ocin]

All work fine, but not oil temp !

[chris781]

hi how are you ?
I have the same problem could someone solve it?

[Ocin]

hi how are you ?
I have the same problem could someone solve it?Hi, I never found the problem, finally I changed cluster.



Envoyé de mon LYA-L29 en utilisant Tapatalk

[seattm2012]

cluster change solved problem?


Hi, I never found the problem, finally I changed cluster.



Envoyé de mon LYA-L29 en utilisant Tapatalk

[Ocin]

cluster change solved problem?Yes, I changed cluster and it worked

Envoyé de mon LYA-L29 en utilisant Tapatalk

[chris781]

ohhh That's bad:palm2:

thanks